Skip to main content ↑ ↓
Topic: Smart Wheel Buttons (Read 680 times) previous topic - next topic

Smart Wheel Buttons

I disassembled the Smart Wheel assembly to clean up the switches. Anyhow, I dropped the plastic cover (hey, it happens!) and all the buttons went hither and yon. Anyhow, for future reference, the buttons are not identical and they have to be placed properly or the thing presumably won't work. Anyhow, turns out that each button has a kind of hard to see identifier (A, B, C, D, E) stamped on its backside which matches to those stamped on the assembly. The third photo illustrates where it is.
jor
93 225
95 300
97 270
99 320

Re: Smart Wheel Buttons

Reply #1 –
The 99 VIP wheels buttons were better grouped and the spoke arms leather padded and at a better angle in my use.

The later wheel is a bolt on and in the lower $200 range.

Works with your existing controller
"Riding and rejoicing"
Bob
1997 U320 40' Mid entry, build 5132,  wtbi ce27, 4th owner
2007 Solara convertible
2 prodeco tech outlaw ss electric bikes

1095 watts solar
08 Ls 460 and a sc430
2000 Ford F-250 superduty 4x4

Re: Smart Wheel Buttons

Reply #2 –
Very timely for us...please let me know how much difference it made.  We sent the King in for rebuild.  I wanted to do this before it comes back. (We put it on the slow boat as the quote was $131 one way three day from Hampton Roads). It appears all I have to do is remove the outside cover and there they are ready to be cleaned.  They have apparently lost some of their "click". 
George and Steph
1997 U270 36 Build 5081 "Honu"
1180w Solar 400A lithium all Victron house system
Motorcade 17670, SKP 128300, FMCA F459019
73 VW Camper, 79 VW Camper, 2363 Sunline, and an Arctic Fox 25P

Re: Smart Wheel Buttons

Reply #3 –
Quote
It appears all I have to do is remove the outside cover and there they are ready to be cleaned. 

Yea, you just unscrew the four torx screws from the back and lift the unit off of the wheel. Then turn it over and remove the four torx screws that attach the circuit board. Then I just sprayed with DeoxIT D5 (recommended by the estimable ChuckP), clicked the little switches a couple of times, sprayed again and finished off with some air. If you don't dump all the buttons on the floor it's a quick little job. I'll post after we try it out which should be in the next couple of weeks.
jor



93 225
95 300
97 270
99 320

Re: Smart Wheel Buttons

Reply #4 –
The Deoxit came in today...read Chucks post.  Going to give it a go and see what happens.  The pictures were much appreciated.
George and Steph
1997 U270 36 Build 5081 "Honu"
1180w Solar 400A lithium all Victron house system
Motorcade 17670, SKP 128300, FMCA F459019
73 VW Camper, 79 VW Camper, 2363 Sunline, and an Arctic Fox 25P
 

Re: Smart Wheel Buttons

Reply #5 –
Thanks for the photos and information!

Deoxit is good stuff.  It also works well on audio equipment where potentiometers (volume knobs if anybody remembers those) and selector switches have some oxidation and are causing issues including noise.

Chris