Skip to main content ↑ ↓
Topic: Silicone Spray Types (Read 553 times) previous topic - next topic

Silicone Spray Types

just ordered these 2 silicone sprays. Any issues with either around the coach?  I read an earlier post of silicone staining walnut inside. Want to lube Windows, hinges, locks, etc.

Amazon.com: B'laster 16-TDL Advanced Dry Lube with Teflon - 9.3-Ounces:...

Amazon.com: 3M 08897 Silicone Lubricant (Dry Type) - 8.5 oz.: Automotive

As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.
Randy (N4TDT) and Karen Crete
Sarasota, Florida
SOLD:  2000 U270 34' WTFE Build 5756 "Ole Red"

Re: Silicone Spray Types

Reply #1 –
I use a dry product, CLP = Clean, Lube and Protect. There are several manufacturers that can be found in a gun store., on line or B&M.
1993 U300 40ft GV SE
Build # 4344

Re: Silicone Spray Types

Reply #2 –

Randy, I use the 3M dry type (it sprays on as a liquid but dries) for window tracks, use plenty, use a paper towel to prevent overspray.  I use the 3M wet type for awning roller ends, awning arms, tow bar parts, bay door locks etc.  I use a dry lubricant with PTFE spray on our electric sliding steps tracks.

Be very careful spraying anything inside.  It is hard to control and very hard to fix overspray problems.

On hinges, try some Marvel Mystery Oil, a drop on a Qtip, and apply to hinge while moving it then wipe it off.
Amazon.com: Marvel MM13R Mystery Oil - 32 oz.: Automotive

You might be able to find a pint can.  Or any other kind of light oil.

As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.
Roger Engdahl and Susan Green
2001 U320 3610 #5879 (Home2) - 2014 Jeep Cherokee or 2018 F150
Hastings, MN

Re: Silicone Spray Types

Reply #3 –
Roger, I recall a prior discussion....maybe Carol.....I use a toothbrush in the window tracks to get clean and lube.  Works really well,.......... oh, and then I wash the brush with water and return to Jackie's side of the sink. 

That combination finally made my windows easy to open.
Mike
2001 U320 4010 Build 5878 (Gus)
Wrangle Unlimited Toad
Nacogdoches

Re: Silicone Spray Types

Reply #4 –
Quote from: Michael & Jackie –
Roger, I recall a prior discussion....maybe Carol.....I use a toothbrush in the window tracks to get clean and lube.  Works really well,.......... oh, and then I wash the brush with water and return to Jackie's side of the sink. 

That combination finally made my windows easy to open.

AND, more importantly, put you in TIME OUT!
Brett Wolfe
EX: 1993 U240
Moderator, ForeForum 2001-
Moderator Diesel RV Club 2002-
Moderator, FMCA Forum 2009-2020
Chairman FMCA Technical Advisory Committee 2011-2020

Re: Silicone Spray Types

Reply #5 –
You never know where Jackie has used your toothbrush!

I used compressed air and the vacuum to clean the tracks out as well as possible and then coat them liberally with the dry silicone lube.  Mostly along the bottom track where the window slides when you open it and then where it slides when you close it.  Once or twice a year seems to keep them sliding pretty well.

And Chuck,  B&M is a well known brand of linen lifters and lower end lube but I have never heard of then being used to coat window tracks. :o
Roger Engdahl and Susan Green
2001 U320 3610 #5879 (Home2) - 2014 Jeep Cherokee or 2018 F150
Hastings, MN
 

Re: Silicone Spray Types

Reply #6 –
Quote from: Michael & Jackie –
.I use a toothbrush in the window tracks to get clean and lube.  oh, and then I wash the brush with water and return to Jackie's side of the sink. 

Michael,
I know this may run this thread amuck but this sounds a lot better than one of the grandkids using the toothbrush on one of the dogs teeth and then return the brush to the rack.

Pamela
Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."