Skip to main content ↑ ↓
Topic: Programming new remote keyfobs (Read 310 times) previous topic - next topic

Programming new remote keyfobs

I've located 2 of the proper FCCID remotes. Here's what I've tried with regard to programming which was included with the fobs (Isuzu fobs).

Turned ignition key on and off. Pushed yellow button in box behind passenger kick plate. Box begins clicking. Pushed Lock on the fob. Instructions  say other functions will be "learned". Turn ignition on and odd to exit programming.

New remote will lock doors but not unlock. There must be some step I'm missing. Anyone have the proper sequence?

Randy
Randy (N4TDT) and Karen Crete
Sarasota, Florida
SOLD:  2000 U270 34' WTFE Build 5756 "Ole Red"

Re: Programming new remote keyfobs

Reply #1 –
Randy,
Do the procedure again, this time do the unlock.  You might have to program each function separately.  Worth a try.
John M.
John & Carm Morales

"We travel not to go anywhere, but to just go.  We travel for travel's sake.  Our great desire is to move."
 

Re: Programming new remote keyfobs

Reply #2 –
I got it programmed!  I'm not quite sure if John's suggestion was the key or I simply tried enough variations but we're now in business with a replacement key fob.

FYI, I searched by the FCC ID on the factory fob and the replacement I bought was branded GM/Isuzu.  I guess this makes some sense since the ignition key I got was noted GM.
Randy (N4TDT) and Karen Crete
Sarasota, Florida
SOLD:  2000 U270 34' WTFE Build 5756 "Ole Red"