Question on ride height valve

Skip to main content ↑ ↓

Topic: Question on ride height valve (Read 551 times) previous topic - next topic

Question on ride height valve

June 21, 2018, 03:53:49 pm

Noticed on the floor one of the rear ride height valve rubber covers has fallen off. Fabricating a new on out of clear vinyl tubing. My question is the valve only blows air out, it doesn't suck any air from the outside in. Is this true?

Re: Question on ride height valve

Reply #1 – June 21, 2018, 04:00:51 pm

Quote from: qcj – June 21, 2018, 03:53:49 pm

Noticed on the floor one of the rear ride height valve rubber covers has fallen off. Fabricating a new on out of clear vinyl tubing. My question is the valve only blows air out, it doesn't suck any air from the outside in. Is this true?

True. That is just the EXHAUST. The intake is from the pressure air system.

Re: Question on ride height valve

Reply #2 – June 21, 2018, 04:15:01 pm

Thanks Brett, I thought that was true but wanted to be sure. I went back into the archives and found this is an on going problem and also a lot of helpful ways to fabricate something that works better. I am going to replace all three.

Affiliate Notice

ForeForums is user-supported. When you purchase through some links on our site, we may earn an affiliate commission at no cost to you. As an Amazon Associate I earn from qualifying purchases.