Skip to main content ↑ ↓
Topic: STEP WONT MOVE 06 PHENIX (Read 548 times) previous topic - next topic

STEP WONT MOVE 06 PHENIX

OK, RIGHT UP FRONT, IM A PILOT NOT A MECHANIC AND MOST PILOTS NEED PICTURES!.  I ADMIT IT.  SO MAKE IT SIMPLE.  :)
 SAYING THAT I HAVE A STEP THAT WONT MOVE ON A 06 PHENIX.  WHEN I START THE ENGINE, CLOSE THE DOOR I CAN SEE ONE SIDE OF THE STEP TRYING TO MOVE AND I CAN ACTUALLY PUSH ON IT SLIGHTLY AND MOVE IT A SMALL AMOUNT BUT THE OTHER SIDE OF THE STEP WILL NOT BUDGE.  I TALKED TO JAMES AT FACTORY BUT CANNOT FIND THE "SQUARE" THING WHERE THERE IS A "PLUNGER". I HAVE THE STEP THAT JUST SLIDES OUT.  SO IF ANYONE CAN HELP, MAYBE SEND ME A PIC ON HOW I CAN GET THIS STEP IN SO I CAN HEAD TO THE FACTORY IT WOULD BE APPRECIATED.

COULD BE ANYWHERE IN THE WORLD!
BRUCE
Could be anywhere in the world!

Bruce

Re: STEP WONT MOVE 06 PHENIX

Reply #1 –
Are you shouting? Look under part of step that you stand on, and you will see the ends of two air cylinder rams. Either remove the pins, or unscrew the brackets. You should be able to slide step in and tape it closed, You might have to secure the air rams if they hang too low.
This is if you have the single slide out step like some 03's have.
Jim C.
coachfree, previous 1997, 1999, 2000, and 2003 Foretravels.

Re: STEP WONT MOVE 06 PHENIX

Reply #2 –
There is a cover that must be removed before you can see and access the air cylinder that opens and closes the step. It is directly under the entry step when it is retracted. Sorry no pic to show you though.
Previous coach - 2007 Phenix 45'

Re: STEP WONT MOVE 06 PHENIX

Reply #3 –
Quote from: brrving –
There is a cover that must be removed before you can see and access the air cylinder that opens and closes the step. It is directly under the entry step when it is retracted. Sorry no pic to show you though.
Maybe my coach is different than yours, but it also has a cover over the air cylinders when closed, but when the step is extended, the end of the cylinder ram, the clevis pin and its attachment to the step is exposed. When step closed, cannot see any of the step mechanism.
Jim C.
coachfree, previous 1997, 1999, 2000, and 2003 Foretravels.

Re: STEP WONT MOVE 06 PHENIX

Reply #4 –
Guys....pictures....the man has specifically requested pictures.....
The selected media item is not currently available.
Lynn & Marilyn Sickel
Tollville, AR
1997  U320  40'
2021 Chevrolet Silverado pickup
Motorcader  17257
 

Re: STEP WONT MOVE 06 PHENIX

Reply #5 –
Quote from: Forewheelers –
Guys....pictures....the man has specifically requested pictures.....
I posted a picture of the clevis joint he has to detach.
See reply #1.
Jim C.
coachfree, previous 1997, 1999, 2000, and 2003 Foretravels.