Skip to main content ↑ ↓
Topic: Ride Height Valve Cover (Read 699 times) previous topic - next topic

Ride Height Valve Cover

I was greasing the RV yesterday and noticed the exhaust filter and cover were missing from the front ride height control valve. For those that have recently bought a Foretravel you might want to check yours as the rubber covers dry out and fall off over time. There are several threads that describe different homemade solutions. You can buy the proper replacement from NAPA for about $7 each. The part number is RN10JE.  Ride Height Filter

I have found that the rubber covers go on with little difficulty if you turn them inside out and fold the edges up onto the valve orifice. Here's a few photos of mine on a 97 270.
jor

Re: Ride Height Valve Cover

Reply #1 –
Good pictures and post.

Re: Ride Height Valve Cover

Reply #2 –
Thanks Jor, great illustration and appreciate the part number.  Are there 4 or 8 of these valves on our rigs?
Have used NAPA for many items in the past and they have always come through with the correct parts.  Purchased all our fuel filters from NAPA that we carried on the coach.