Skip to main content ↑ ↓
Topic: Bedroom slide Mirror (Read 471 times) previous topic - next topic

Bedroom slide Mirror

Coming back from Phoenix on the I40 we hit some turbulence as we were getting close to Kingman.. Pot holes 4ft in diameter.. 1 right after another.. My son came to see if we were offroading in the Rv at 70.

Mirror came off the slide/track and cant seem to fit it back on. 1 door is still on and slides but I cant get enough room by sliding the frame up and into position.. Any ideas?

Re: Bedroom slide Mirror

Reply #1 –
David, the bypass sliding doors usually have to have the bottom free to swing out enough to get the roller into the track.  See of you can remove whatever guides there are on the bottom so that it can swing out.
Roger Engdahl and Susan Green
2001 U320 3610 #5879 (Home2) - 2014 Jeep Cherokee or 2018 F150
Hastings, MN
 

Re: Bedroom slide Mirror

Reply #2 –
quci look and couldnt see how but I will dig deep today.. Thanks.. It is so tight that I am not sure how it bounced out without cracking.