Skip to main content
Topic: Need Help pl;ease near Pittsburg PA (Read 924 times) previous topic - next topic

Need Help pl;ease near Pittsburg PA

We are stuck in a emergency pulloff on Hwy 79 in the middle of a major construction zone....suddenly lost all air to front bags all 4.

Air tanks are holding air fine.....HWH panel is not lit and "level coach" is flashing.

any help appreciated

Hans

e
Hans & Marjet
1995 U300 "Ben" (#4719)
3176B Cat,4060HD,Jake
SKP#139131
Motorcade#17579
2006 Honda Element (towed)

Re: Need Help pl;ease near Pittsburg PA

Reply #1
Call MOT and ask for Aubrey Lee in Tech Support

Tim Fiedler
Gen-Pro.biz
630 240-9139
Tim Fiedler    2025 LTV Unity MBL on Order
2000 Chevy Tracker 2 Door Convertible 4WD Now lifted 4.5"
1985 Citroen 2CV6 Charleston
Murphy Rebel on wheels with 175HP Titan
Cessna P337
1980 48' Westport MY (!/4 Share)

Re: Need Help pl;ease near Pittsburg PA

Reply #2
If no lights on HWH control pad, possible connector has come loose on back of control pad.

If you have been down a bumpy road, possible that the linkage fell off your front ride height valve, which caused bags to dump air.

1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"

Re: Need Help pl;ease near Pittsburg PA

Reply #3
I checked the plug all is good...fuse ???? I'll get under and see ..
Hans & Marjet
1995 U300 "Ben" (#4719)
3176B Cat,4060HD,Jake
SKP#139131
Motorcade#17579
2006 Honda Element (towed)

Re: Need Help pl;ease near Pittsburg PA

Reply #4
 If the dash gauges read in range and the emergency brake stays off. IE air system intact , front ride valve  must be out of range or the line into that end  broke.
I had the ride valves get knocked out of adjustment quite often on parts of 401. Super rough roads even going slow.


Re: Need Help pl;ease near Pittsburg PA

Reply #6
Yes on linkage mine is kinda wimpy
Old Phart Phred, EIEIO
89 GV ored 36' #3405 300 hp cat 3208 ATAAC side radiator, mountain tamer exhaust brake

Re: Need Help pl;ease near Pittsburg PA

Reply #7
I think Hans is on the road.
1993 U300 40ft GV SE
Build # 4344

Re: Need Help pl;ease near Pittsburg PA

Reply #8
Thx all for the great responses. Called MOT support and Aubrey relayed some check points.
Mike (protech) exactly what happened...the entire "guts" of the front air leveling valve were missing. Lots of rough hwy up near Pittsburgh. Had a spare valve with me and changed it. 3hrs later ( had to pick up a brass 1/4 plug from HD) we are back on the road.
Chuck ...much appreciate the schematic...
Tim...Thx's for the MOT ref

Now to get a good nights sleep at a Hwy79 rest stop.

Hans & Marjet
1995 U300 "Ben" (#4719)
3176B Cat,4060HD,Jake
SKP#139131
Motorcade#17579
2006 Honda Element (towed)

Re: Need Help pl;ease near Pittsburg PA

Reply #9
Thanks for all your help. We were in trouble yesterday.  Hans worked soooo hard trying to fix the problem, and guess what....he fixed it.  Just intime for Coach-net to stop by.  Thankful also for the State police sitting behind our coach with flashing lights. We were in the middle of north and south construction lanes and a joining of Highway 70 and 79, south of Pittsburg in a little emergency turnout.  I did take a video of Hans working on the air leveler and will try to post it here, if I can figure it out.
Marjet and Hans (Storm and Jazzy)
1995 U300 Grand Villa
#4719
SKP#139131

Re: Need Help pl;ease near Pittsburg PA

Reply #10
Glad you were able to diagnose and get back on road. Quite a story and quick turn around....

When our front ride height valve failed (but with the guts in place) we made a temporary fix that kept us able to drive for a couple of weeks ...

Remove front linkage to front ride height valve (center of front axle), then manually rotate valve to "fill" position, when bags are filled where we need to drive, rotate back to center off position, then tape around valve to keep it in that location.  Repeat as necessary.

Ride height valve has three very close setting, empty, off, fill. Rotate slowly as each setting is very close to the other settings.

Re: Need Help pl;ease near Pittsburg PA

Reply #11
Barry that is information that needs bookmarked or put on Beaman arm info.
Larry Warren
1996  U320 36' SBID "Lola" sold 2020
Build #4970
Motorcade #18318