Skip to main content ↑ ↓
Topic: Pitman arm Puller pics and measurements (Read 634 times) previous topic - next topic

Pitman arm Puller pics and measurements

Here are some pics and measurements so if you wanted to make one you would be able to. Let me know if you have any questions.. seems to be a Hot topic the last couple days.

Back plate is 2" thick
Front plate is 1/4' thick
inside the cup (depth) is 1"
Center hole is 7/8"

The rest is in the pics but if you feel I missed something just post it up and I will try and get it.

Quote from: Caflashbob –
Sorry for the delay.  The internal opening distance is 2".

Updated.

Re: Pitman arm Puller pics and measurements

Reply #1 –
I cant find my original piece so I made another.. cant remember the allen head size... but basically this knuckles over the arm and the center bolt pushes against the plate and pushes the arm off the shaft.

Re: Pitman arm Puller pics and measurements

Reply #2 –
How quick could you make me one and ship it to me? How much would you want for a complete setup with bolt and everything?  Shipping 75602.

I need to take my box as soon as possible and ship it to redhead. 

Thanks Eric
2002 U270 34' Build 5953
Cummings ISL400HP
3410 Floor Plan
Longview, TX

Re: Pitman arm Puller pics and measurements

Reply #3 –
Thanks David
Chris
1999 U 320 DGFE
Build Number 5523
Chris & Elka Lang
In the field, Lonoke AR

Re: Pitman arm Puller pics and measurements

Reply #4 –
Quote from: Eric & Alena + 3 –
How quick could you make me one and ship it to me? How much would you want for a complete setup with bolt and everything?  Shipping 75602.

I need to take my box as soon as possible and ship it to redhead. 

Thanks Eric

I can send the puller.. cant find the allen head adaptor right now.. maybe Lon can chime in on the size.. everyone seems to have an issue right now.. Craneman will need it next when you are complete.

Re: Pitman arm Puller pics and measurements

Reply #5 –
Here is the invoice from the parts needed from Mcfadden dale..

The allen head and socket adaptor

Re: Pitman arm Puller pics and measurements

Reply #6 –
IIRC the allen is 5/8"

see ya
ken
The selected media item is not currently available.ken & dori hathaway & Big Agnes
🍺1992 U300 GrandVilla WTBI #4150 FOT FBP 2011
✨6V-92TA DDEC Parlor Coach 350HP Series 92
🏁2011 Nissan XTerra Pro-4X

Re: Pitman arm Puller pics and measurements

Reply #7 –
Yes that's what lon's Says on it. 
"Riding and rejoicing"
Bob
1997 U320 40' Mid entry, build 5132,  wtbi ce27, 4th owner
2007 Solara convertible
2 prodeco tech outlaw ss electric bikes

1095 watts solar
08 Ls 460 and a sc430
2000 Ford F-250 superduty 4x4