Skip to main content
Topic: Norgren Valve question  (Read 667 times) previous topic - next topic

Norgren Valve question

There are two norgren valves behind the entry steps on our U270, according to folklore I should be able to pull the valves knob and adjust the pressure.
Having pulled, pulled harder, sprayed it with penetrating fluid and still not budging.
Am I doing something wrong, is there a way or trick to this, any help appreciated.
David
David & Emma Roche
Dino (Golden Doodle)
1999 U270 WTFE 36' Build # 5534
Xtreme "Lights, Stripes & Roof"
Motorcade# 18321
Dayton, Ohio
Towd: Jeep Grand Cherokee
Two Townie Electra Bikes

Life is made to enjoy, the Foretravel helps!

Re: Norgren Valve question

Reply #1
1. according to folklore I should be able to pull the valves knob and adjust the pressure.
2.  is there a way or trick to this, any help appreciated.

David,
1. That is just a rumor, similar to the Boggy Creek Monster. With there location they are most likely full of dirt.
2. I normally don't recommend this, but in this case just replace it. You can pick one up at most any home improvement store in there air compressor stuff. They aren't anything special.

Mike


Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."

Re: Norgren Valve question

Reply #2
OK thanks Mike,  there is no movement- will see what I can pick up
David & Emma Roche
Dino (Golden Doodle)
1999 U270 WTFE 36' Build # 5534
Xtreme "Lights, Stripes & Roof"
Motorcade# 18321
Dayton, Ohio
Towd: Jeep Grand Cherokee
Two Townie Electra Bikes

Life is made to enjoy, the Foretravel helps!

Re: Norgren Valve question

Reply #3
This is what I used.
Kobalt Mini Air Regulator at Lowes.com

Mark
The selected media item is not currently available.
Mark and Tanya
Milton , Florida
US Navy Veteran (DV)
1999 U270 Special 40' CAI , 2015 Jeep Wrangler Sahara

Re: Norgren Valve question

Reply #4
Carry extra, they are all over the coach.

I would also carry a new Norgren valve, they go bad. If your on the road, easy fix to replace. At home you can take them apart to clean them and reassemble (sometimes).

Venturi vacuum pump / multi-stage / pneumatic / compact - M/58102/20 - Norgren

Chris


Chris and Tammy White  CDA Idaho
Previous owners 1997 U295 36' 3126 Cat 300 HP Build # 4998
Former Foretravel tech & RVIA certified tech
Former owner Custom Satellite home/RV satellites 
Former owner Vans LTD  van conversions
Unemployed, panhandler, drag racer NHRA #6348

Re: Norgren Valve question

Reply #5
Mark thank you for the Lowe's link, I seem to live there and was not familiar with that part, needed one and on Chris's recommendation bought two, that's all they had, at least I can get it on tomorrow before we head to Nag next week, the step cover is way too fast closing
Thanks , both of you
David
David & Emma Roche
Dino (Golden Doodle)
1999 U270 WTFE 36' Build # 5534
Xtreme "Lights, Stripes & Roof"
Motorcade# 18321
Dayton, Ohio
Towd: Jeep Grand Cherokee
Two Townie Electra Bikes

Life is made to enjoy, the Foretravel helps!

Re: Norgren Valve question

Reply #6
You can adjust the opening and closing with the exhaust on the back of the rectangle norgren .. flat head screw driver

Re: Norgren Valve question

Reply #7
Don't need to replace to change close speed?
 so Knob is only for pressure?
Thanks
David & Emma Roche
Dino (Golden Doodle)
1999 U270 WTFE 36' Build # 5534
Xtreme "Lights, Stripes & Roof"
Motorcade# 18321
Dayton, Ohio
Towd: Jeep Grand Cherokee
Two Townie Electra Bikes

Life is made to enjoy, the Foretravel helps!

Re: Norgren Valve question

Reply #8
Don't need to replace to change close speed?
 so Knob is only for pressure?
Thanks
Correct.
1999 40 ft. U-320 wtfe build 5563 Chuck & Lynda's "Rollin' Inn"  2030 watts solar
prev. mh's 71 GMC 5 yrs. 73 Pace Setter 1 yr. 78 Vogue 5 yrs 81 FTX 40ft all electric 18 yrs. 1996 Monaco Signature 3 yrs.
2014 Grand Cherokee Overland
Dream as if you will live forever. Live as if you will die today.  James Dean

 

Re: Norgren Valve question

Reply #9
Don't need to replace to change close speed?
 so Knob is only for pressure?
Thanks
You should have 2 exhaust ports on the Norgren valve.. the rectangle one.. it has a flat head slot in the back of the exhaust piece.. turn it in or out to adjust the speed of the shutting or opening