Skip to main content ↑ ↓
Topic: Relocate Aqua-hot register (Read 654 times) previous topic - next topic

Relocate Aqua-hot register

Want to remove sofa to make room for a TV-lift cabinet in our new-to-us '98 U295. Sofa has Aqua-hot register built in. See picture. I assume the hoses are anti-freeze or some-such. Is this correct? Any advice or things to watch out for moving this register? Is this a pressurized system?
1998 U295 36' No slides
Towing 2018 Jeep Wrangler
Previous rigs:
  1995 26' Fleetwood Flair
  1998 34' Fleetwood Bounder
  1997 40' Bluebird BMC
  1999 24' Winnebago Minnie Class C

Re: Relocate Aqua-hot register

Reply #1 –
Quote from: Dan Keyes –
1. I assume the hoses are anti-freeze. Is this correct?
 2. Is this a pressurized system?

Dan,
Welcome to the group.
1. Yes
2. When the unit is at temp yes.

Mike
Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."

Re: Relocate Aqua-hot register

Reply #2 –
Dan,  Turn diesel burner and electric element off and allow heater to cool.  You can speed this up by running hot water facuet till water is cool.  Then use hose pinch pliers to pinch the two heater hoses to the fan coil.  Disconnect the hoses noting which hose goes to each connection and and power wires.  Move fan coil to new location.  Reconnect the hoses, wires, remove pinch pliers and you are done.  You will need a few paper towels to catch a cup or two of antifreeze.

The wires and hoses can be extended to suit just reconnect to same connections.
Rudy Legett
2003 U320 4010 ISM 450 hp
2001 U320 4220 ISM 450 hp
1995 U320 M11 400 hp
1990 Granvilla 300 hp 3208T
Aqua Hot Service Houston and Southeast Texas

Re: Relocate Aqua-hot register

Reply #3 –
If the hoses are old and stiff clamping them might crack them.  Rudy is the guru and he does these all the time so he knows.  There are specific hose clamps made that have wider jaws. Might be worth it to pick up 2?
"Riding and rejoicing"
Bob
1997 U320 40' Mid entry, build 5132,  wtbi ce27, 4th owner
2007 Solara convertible
2 prodeco tech outlaw ss electric bikes

1095 watts solar
08 Ls 460 and a sc430
2000 Ford F-250 superduty 4x4

Re: Relocate Aqua-hot register

Reply #4 –
Thanks for the help guys. Sounds simple enough. I don't have pinch pliers but I see them at Harbor Freight here.
1998 U295 36' No slides
Towing 2018 Jeep Wrangler
Previous rigs:
  1995 26' Fleetwood Flair
  1998 34' Fleetwood Bounder
  1997 40' Bluebird BMC
  1999 24' Winnebago Minnie Class C
 

Re: Relocate Aqua-hot register

Reply #5 –
Quote from: Dan Keyes –
Thanks for the help guys. Sounds simple enough. I don't have pinch pliers but I see them at Harbor Freight here.
Those are the ones I used on pinching the Aquahot Fuel lines off. They should work fine on your project.

I'm just starting to do the same thing. But I have a new 49" Samsung TV and I have this triangle table in the way with a an outlet under it...UGH
Prior 2003 U295  40ft  400Hp -Sold
2020 F350 Tremor - Sold
2021 Bundutec Roadrunner - Sold
2017 Airstream Classic - Sold that POS
2017 F250 - Sold
2019 Sprinter Van - Sold
2022 Winnebago Revel 4x4


Army Airborne Vet.