Skip to main content ↑ ↓
Topic: Microphor replacement? (Read 5512 times) previous topic - next topic

Re: Microphor replacement?

Reply #20 –
Quote from: Sven and Kristi –
I don't need to re-measure the bolts; I'm intimately familiar with the unit, having previously disassembled it to replace parts.  There is one mounting bolt on each side of the toilet and they are exactly 8" from the cabinet wall.  Your toilet will not fit.

What model Microphor toilet do you have? Our LF-220 had two mounting bolts on each side. Have you actually measured the distance from the wall to the drain hole?

Re: Microphor replacement?

Reply #21 –
How about this one?

Re: Microphor replacement?

Reply #23 –
I'll go to the coach and get the info.
Done

Re: Microphor replacement?

Reply #24 –
Quote from: Sven and Kristi –
My toilet is the LF-229 model.  In the specifications below, you will see that the bolt distance is actually 7.5" from the back of the toilet and has two bolts.
https://mullaney-associates.com/wp-content/uploads/2018/03/24323-Manual-for-DC-OPERATED-MODELS-LF220-229-320.pdf

That's very interesting! Does your LF-229 have the remote flush assembly?

Re: Microphor replacement?

Reply #25 –
I believe the original was the lf229. The PO put in the Sealand

Re: Microphor replacement?

Reply #26 –
Yes.  We do not like having an electric toilet; much more complicated than it needs to be.  I don't want to spend more time replacing parts on a 21 year old unit.

Re: Microphor replacement?

Reply #27 –
Quote from: Sven and Kristi –
Yes.  We do not like having an electric toilet; much more complicated than it needs to be.  I don't want to spend more time replacing parts on a 21 year old unit.

I was happy to replace our Microphor since it seemed to be overly complicated but we do like having an electric toilet. I hope you can find a suitable replacement that is correct for your unusual circumstances.

Re: Microphor replacement?

Reply #28 –
Quote from: Sven and Kristi –
Yes.  We do not like having an electric toilet; much more complicated than it needs to be.  I don't want to spend more time replacing parts on a 21 year old unit.
Sorry the one I have is electric. It is the same one that came from the factory on my brother's '05 Monaco other than mine has the lever and his has the remote button. At least being Dometic parts would be cheaper if I ever need them.

Re: Microphor replacement?

Reply #29 –
Quote from: D.J. Osborn –
That's very interesting! Does your LF-229 have the remote flush assembly?
Yes.
In doing some research I'm finding that a "gravity drop" toilet (basic ball valve without macerator) might be a problem with my layout.  Though I prefer the basic lever operated unit, I haven't written off the electric which is why I'm looking at the Tecma.  I'm afraid it might be as expensive as the one in the space shuttle. 

Re: Microphor replacement?

Reply #30 –
Re: SeaLand 4400
Tried a few sites for pricing.....no dice
Must be expensive
On site showed 11" to center of discharge
I maybe incorrect

Re: Microphor replacement?

Reply #31 –
Quote from: Sven and Kristi –
Yes.
In doing some research I'm finding that a "gravity drop" toilet (basic ball valve without macerator) might be a problem with my layout.  Though I prefer the basic lever operated unit, I haven't written off the electric which is why I'm looking at the Tecma.  I'm afraid it might be as expensive as the one in the space shuttle.
The 229 is a drop toilet. Are you referring to the complicated mechanism under the closet floor? Is it a macerator? 

Re: Microphor replacement?

Reply #32 –
Sven, here are the photos I promised.  I installed a Dometic 320 which is also an ADA unit for taller height when you get older.  lol

First photo;  back of commode to the wall, #2 to the back of the cabinet door and it still opens, #3 the floor plate I was referring too.  Gives the install a finish look.  #4 another shot of the clearance.  Hope this helps!

Re: Microphor replacement?

Reply #33 –
I too have installed the Dometic 320, with the baseplate mentioned and shown below.  I would not install the 320 without the baseplate.  It makes installing simple and stable.  No regrets on the 320.  The experience has been that of a worthwhile upgrade.
Dometic Sealand 385311719 White 310 Mounting Adapter Kit - Boat and RV...

Re: Microphor replacement?

Reply #34 –
Quote from: Jack Lewis –
I too have installed the Dometic 320, with the baseplate mentioned and shown below.  I would not install the 320 without the baseplate.  It makes installing simple and stable.  No regrets on the 320.  The experience has been that of a worthwhile upgrade.
Dometic Sealand 385311719 White 310 Mounting Adapter Kit - Boat and RV...
This, obviously, would not help my situation, but might help those with the 320.

Re: Microphor replacement?

Reply #35 –
Sven I to have a 36 foot coach and believe has the same toilet. Positioned diagonally kinda in a corner between shower and sink. So far I have had good service for the month I've owned the coach but that being said the P.O. had two timers for it. I agree with you too many moving parts. I've been following your post hoping you come up with a solution. The 40 foot coaches have a different toilet I think. Mine is very space limited to the side. My neighbors 2002 295 36 has a real nice manual fill and dump toilet. It works very good. I hope you come up with a solution. It's on the back burner for me for now, but I'm 100% sure failure is inevitable. I'll measure mine tomorrow to see if it's the same.
Scott 

Re: Microphor replacement?

Reply #36 –
Scott, the best solution I've seen is in the Beamalarm tech pages ("toilet") which I may go to when I have issues again.  It requires a 5" raised platform and a 45 degree flange to accommodate the required clearance.  Providing more information for the flange would have been helpful.  I did the required repairs and it works for now, but still loses water.
 

Re: Microphor replacement?

Reply #37 –
Although a bigger dirtier job, wonder if the pipe below could be replaced to incorporate the needed offset? I'll keep for reference, I'm sure my day will come, but I'll pull the plug on it early. More pressing issues now like reinstall dinette. Long list
Scott