Skip to main content
Topic: duo-therm controller (Read 478 times) previous topic - next topic

duo-therm controller

H

Help! have no power to duo-therm controller. Can it be by-passed
Cover came off the rear A/C unit and it rained. Not sure if something got wet
'02 U295 36'
Build #5937

 SKP#104358
Motorcade#17428

Re: duo-therm controller

Reply #1
Check the 3 amp fuse on both front and rear upper boards on the ac
previous 1984 35 ft ORED 250 HP 3208 Cat       
previous 1998 40 ft U295 CAI 325 hp Cummins
previous 2003 40 Ft u320 build #6140 450 Cummins M11.                                                         
1999 Mazda Miata
Ron, Nancy, Tipper the cat, Max The dog
1997 U 270 36 ft build number 5174 8.3 Cummins

Re: duo-therm controller

Reply #2
 8) Are the boards located on roof under  A/C cowling? Thanks
'02 U295 36'
Build #5937

 SKP#104358
Motorcade#17428

Re: duo-therm controller

Reply #3
Yesterday, I went to work inside the coach in almost 110 degree weather but had no reading on either 5 button Duo-Therm display and no AC. Strange as it was working a few days earlier. I checked the #4 & #6 breakers, pulled the cover off and put a meter to the CBs then pulled the panel up on the ACs and checked voltage there. 118 volts everywhere but no display and no AC.

I changed the fire extinguisher by the entry several days ago and guess what I accidentally hit?

Pierce


Pierce and Gaylie Stewart
'93 U300/36 WTBI
Detroit 6V-92TA Jake
1140 watts on the roof
SBFD (ret)

Re: duo-therm controller

Reply #4
Have no idea what you hit. Please do tell
'02 U295 36'
Build #5937

 SKP#104358
Motorcade#17428

Re: duo-therm controller

Reply #5
The master 12voltv disconnect switch.
2002 U270 34' Build 5953
Cummings ISL400HP
3410 Floor Plan
Longview, TX

Re: duo-therm controller

Reply #6
Oh, crap
1996 U295-36, Cummins 300hp, 8.3. Build number 4864. Vin number 1F97D536XTNO54271. Purchased October 31, 2019.

Re: duo-therm controller

Reply #7
what does the 12v master switch have to do with 120v ac system?
My 12v master switch is on. I'm sorry but you lost me some place.
'02 U295 36'
Build #5937

 SKP#104358
Motorcade#17428

Re: duo-therm controller

Reply #8
Tom,

The control side is fed off the 12VDC seems like on your age coach it is somewhere along breaker 50 to 54 that is hid behind the kick panel.

Mike
Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."

Re: duo-therm controller

Reply #9
Parts of the system are 12volt
"Riding and rejoicing"
Bob
1997 U320 40' Mid entry, build 5132,  wtbi ce27, 4th owner
2007 Solara convertible
2 prodeco tech outlaw ss electric bikes

1095 watts solar
08 Ls 460 and a sc430
2000 Ford F-250 superduty 4x4

Re: duo-therm controller

Reply #10
Yes, the dreaded salesperson switch struck when I was least expecting it. I had a 120V mindset and didn't even think about it. I had not turned far and even looked normal but when I pushed the carpet back, the "on" position was close but not close enough.

Lesson learned.

Pierce
Pierce and Gaylie Stewart
'93 U300/36 WTBI
Detroit 6V-92TA Jake
1140 watts on the roof
SBFD (ret)

Re: duo-therm controller

Reply #11
Sorry, I've been out in the sun too long. Was never known to be the sharpest knife in the drawer. I get it now.
'02 U295 36'
Build #5937

 SKP#104358
Motorcade#17428

 

Re: duo-therm controller

Reply #12
Tom,

As hot as it's been in California, everyone here has been out in the sun toooo long. Dark today and cooler, but that's from a fire about 10 miles away. I will finish the generator today and know that the blackouts will come to our area before too long.

Pierce
Pierce and Gaylie Stewart
'93 U300/36 WTBI
Detroit 6V-92TA Jake
1140 watts on the roof
SBFD (ret)