Skip to main content ↑ ↓
Topic: Electrical enigma (Read 547 times) previous topic - next topic

Electrical enigma

I am still pursuing my generator problem, noted in another thread.
I feel that I should start a separate thread regarding this, other, electrical issue.
They MAY be related.
The reason I say this, is that my generator failed to start even though it was on "auto" , and the Magnum control set at 12.2 low voltage
The issue I have, that is puzzling me, is that I was ALWAYS able to hit the main breaker, every morning, and run my few items from the inverter.
Yesterday, and again, today, I hit the main breaker.....but the displays shows 120v in each leg.
It should be blank
I cannot get the inverter to work.
I turned the main back on, and flipped the breaker on the pedestal.
The display is blank, and the inverter is working fine.
Any ideas will be welcome.
Thanks
 

Re: Electrical enigma

Reply #1 –
Glenn,

See my post in your other thread: No generator - Page 5

In this respect, our coaches appear to be very similar, possibly identical. ... same generator, Magnum inverter. I'll do whaterver I can to help, from afar.

Greg

Sent you a PM