Skip to main content ↑ ↓
Topic: Entry Step Bumpers (Read 601 times) previous topic - next topic

Entry Step Bumpers

If those little bumpers on your entry step are getting ratty, these little guys from Ace or Home Depot are just right.
jor

93 225
95 300
97 270
99 320

Re: Entry Step Bumpers

Reply #1 –
Ha, perfect. I literally just took these off a few days ago to get at my vacuum generator and thought to myself "holy crap, these are toast".

Also, there's no way that leather flap is original. Where'd you get it? ;D
1987 Grand Villa ORED
2001 U320 4010

Not all that wander are lost... but I often am.

Re: Entry Step Bumpers

Reply #2 –
Quote
there's no way that leather flap is original. Where'd you get it?

I just take it to an upholstery shop and have them sew me up a new vinyl replacement. Nice little upgrade that you appreciate every time you climb into the coach. Others have done some interesting and good looking replacements too.
jor
93 225
95 300
97 270
99 320

Re: Entry Step Bumpers

Reply #3 –
Quote from: jor –
Others have done some interesting and good looking replacements too.
I cut up a cheap Walmart rubber door mat.  Has held up very well for years.

I also used screw-on bumpers like jor, but clear instead of white.

The skid guard tape with yellow stripe is available at most home improvement stores.

https://www.lowes.com/pd/SKID-GUARD-6-in-x-2-ft-Black-with-Reflective-Stripe-Tread-Strips-Anti-Slip-Tape/3185621


1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"

Re: Entry Step Bumpers

Reply #4 –
Never looked at mine. good idea
1996 U295-36, Cummins 300hp, 8.3. Build number 4864. Vin number 1F97D536XTNO54271. Purchased October 31, 2019.

Re: Entry Step Bumpers

Reply #5 –
I have never seen these bumpers used on a Foretravel. My coach certainly does not have them. When my step is finished being redone should I be putting these on for preventative purposes?
Peter    Alberta Canada
'98 U320 40'  Build 5359 M11 450 HP, Aqua hot, Blu Ox
 

Re: Entry Step Bumpers

Reply #6 –
Quote
When my step is finished being redone should I be putting these on for preventative purposes?
They are not necessary. They just provide a larger attaching surface for the screws like a washer and give that step a nice soft thump when it closes. I had some black ones on another rig but can't recall what I used. Similar though.
jor
93 225
95 300
97 270
99 320