Skip to main content ↑ ↓
Topic: Toilet replacement (Read 480 times) previous topic - next topic

Toilet replacement

I'm replacing the toilet in my 1991 Grand Villa.  The current toilet is on a box about 9" high.
I want to lower it about 5" to accommodate the height of the new toilet.
Is the toilet flange and pipe glued into the holding tank or does it slide into a
Grommet to seal it into the tank.
Has anyone done this operation?

Re: Toilet replacement

Reply #1 –
Watching this post, I replaced our toilet with a lower model and still think it's to high.
Frank & Connie Williams
1999 U320 '36
Build: 5466
MC: 18335

Re: Toilet replacement

Reply #2 –
Quote from: Al mamser –
1.Is the toilet flange and pipe glued into the holding tank
2. or does it slide into a Grommet to seal it into the tank.

1. No
2. Yes

Mike
Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."
 

Re: Toilet replacement

Reply #3 –
When a toilet is on the floor, it indicates the toilet sits over the black tank. And often the box under a toilet indicates the toilet is not over the black tank and an angled ABS pipe is in the box to facilitate flow.