Skip to main content ↑ ↓
Topic: Aqua hot exhaust pipe (Read 530 times) previous topic - next topic

Aqua hot exhaust pipe

I was wondering why the AH was so loud and that we could smell the faint smell of diesel sitting out side. I then noticed there was a break in the pie just before the right angle pipe that exits on the drivers side.  Is there a FT part that can replace this or has anyone fashioned there own pipe?  If so can you advise the size?  I notice there is heat wrap pipe wrap around it as well. Is this necessary? 
Peter    Alberta Canada
'98 U320 40'  Build 5359 M11 450 HP, Aqua hot, Blu Ox

Re: Aqua hot exhaust pipe

Reply #1 –
I just pulled mine off and had a muffler shop bend me a new pipe. It's 1 1/2  inch size. Not hard to get off just be sure and put your stands in before you crawl under the coach. If you aren't able to take it off any muffler shop that has room to get it in in their parking lot can fix it. Not sure if FT has them but would be more costly and hard to ship. You can get the heat wrap at an autoparts store. If you don't use the heat wrap it will scorch your fiberglass, pipe gets very hot.

Larry
Larry & Debbie Town
2000 U320 4210 
Previous 88 GV

Re: Aqua hot exhaust pipe

Reply #2 –
Thanks!!

That makes way to much sense. Lol. I will put it on safety stands and take it to a muffler shop.
Peter
Peter    Alberta Canada
'98 U320 40'  Build 5359 M11 450 HP, Aqua hot, Blu Ox

Re: Aqua hot exhaust pipe

Reply #3 –
I think I've heard Rudy mention replacing it with a 2" pipe and use a straight out tip not an angled down... call Rudy to confirm that...



Keith
The selected media item is not currently available.Keith & Jo
2003 U320T 4025 PBBS Designer series
Build 6203    Cummins 500hp
2000 U320 4010 WTFE / Build 5762 —Sold—
Motorcade #18070   
Pasadena, Texas
2015 Jeep Wrangler Sahara-Sunset Orange pearl coat
Don't argue with a fool, people watching might not be able to tell the difference.

Re: Aqua hot exhaust pipe

Reply #4 –
When I rebuilt my AH I had a muffler shop rebuild a new SS 2". Cost less than $100 and took about 5 minutes to install. I could have but didn't put in a new muffler. Didn't make much difference with the sound. Ordered a new chrome tip and it looked like it came from the factory.

Larry
Larry Warren
1996  U320 36' SBID "Lola" sold 2020
Build #4970
Motorcade #18318
 

Re: Aqua hot exhaust pipe

Reply #5 –
Quote from: hdff –
I think I've heard Rudy mention replacing it with a 2" pipe and use a straight out tip not an angled down... call Rudy to confirm that...



Keith
That's what he told me to do. So I replaced with a straight 2" and put a bend in. I welded to the street ell 1 1/4 [as i recall] pipe coming out of the aqua hot and just screwed the entire assembly in after I had it rapped. So it is louder without the muffler but acceptable. Also purchased a chrome tip that looks nice, at least I think it does. Should probably put one one the generator so they would match, maybe down the road. Goes straight out. Having the exhaust pointing down were we live and use the coach just blows the dust up. Did the same on the exhaust on the engine, straight out 👍👍
Amazon.com: Walker 35596 Chrome Exhaust Pipe Tip : Automotive
Scott

As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.