Skip to main content ↑ ↓
Topic: ABS connection location (Read 304 times) previous topic - next topic

ABS connection location

When I lost my curb side front tire Friday night, it yanked the ABS connector out of wherever it connects.  I've got a call into FT for a schematic, but if anyone has a schematic, picture or description of where the ABS cable from the wheel connects, it would be much appreciated.
Keith
2003 U320 38' #6197

Re: ABS connection location

Reply #1 –
With what you have stated your sensor must be the one with the long cable rather than the one with the 12" cable..  If that is the case there is fast acting valve that you will find about center of the coach hid above the axle. somewhat hid behind the HWH seal air tank. (or on some coaches that is where you should look) The one with the short cable you should be able to see the other end on a loose cable hanging down.

Mike
Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."
 

Re: ABS connection location

Reply #2 –
Definitely a long cable.  I see it shown in the ABS schematic as being 3M long, but it doesn't show where it goes.  Thanks Mike, I'll take a look when the tires come off.
Keith
2003 U320 38' #6197