Skip to main content
Topic: Refrigerator vent/access on outside wall (Read 427 times) previous topic - next topic

Refrigerator vent/access on outside wall

Hi everyone,
I have a residential fridge.
I took off the frame to the vent cover on the side of the coach for the fridge to make sure it was sealed properly.
What should I use to reseal the frame to the coach before I secure it with the screws?
Thanks
Frank & Daisy
NO LONGER  "looking for the perfect Foretravel
36' or less non slide preferred."  She has been found and is ours.
2003 U320 36' non slide  Unit 6103
Cummins ISM 450
Allison 4000MH

Re: Refrigerator vent/access on outside wall

Reply #1
I use 3M 4000UV sealant for those types of tasks.
David and Carolyn Osborn
1995 U320C SE 40' Build 4726 Feb 1995
FMCA 147762
Motorcade 17186

Re: Refrigerator vent/access on outside wall

Reply #2
My go to being an old body guy is windshield urethane (heavy bodied). Stuff is extremely tough and will never come loose and also easy to find. I did replace my vent with a watertight door to take away possibility of future leaks through vent door.

Larry
Larry & Debbie Town
2000 U320 4210 
Previous 88 GV

Re: Refrigerator vent/access on outside wall

Reply #3
When we replaced our Dometic with Samsung, we also placed foil tape on the inside of that cover to cover up the holes.

 

Re: Refrigerator vent/access on outside wall

Reply #4
I cleaned up around the opening, painted area, then used the blue painters tape. Followed that with foil tape about 1/8 " inboard of the blue tape and went up the rigid insulation about 3".
Don't want to secure the frame with anything difficult to remove just in case.
Frank & Daisy
NO LONGER  "looking for the perfect Foretravel
36' or less non slide preferred."  She has been found and is ours.
2003 U320 36' non slide  Unit 6103
Cummins ISM 450
Allison 4000MH