Skip to main content ↑ ↓
Topic: Fleetguard LF14000NN (Read 4738 times) previous topic - next topic

Fleetguard LF14000NN

First time removing this oil filter from coach.
Is this rubber gasket meant to come off?
First time I see something like this.

I had previously purchased a NAPA lube filter I installed that had the "regular " fixed gasket.
Frank & Daisy
NO LONGER  "looking for the perfect Foretravel
36' or less non slide preferred."  She has been found and is ours.
2003 U320 36' non slide  Unit 6103
Cummins ISM 450
Allison 4000MH

Re: Fleetguard LF14000NN

Reply #1 –
That gasket goes with the filter,it just was not crimped to the filter good enough.
96 U270 BUILD 4810
85 380SL
Drummonds TN.

Re: Fleetguard LF14000NN

Reply #2 –
And, the new filter should have one as well-- just want ONE!
Brett Wolfe
EX: 1993 U240
Moderator, ForeForum 2001-
Moderator Diesel RV Club 2002-
Moderator, FMCA Forum 2009-2020
Chairman FMCA Technical Advisory Committee 2011-2020

Re: Fleetguard LF14000NN

Reply #3 –
One thing to always check when removing the filter is to make sure the gasket did not stay on the engine.  Things don't go good when after changing the oil you see a trail as it goes down the road.
2014 ih45  (4th Foretravel owned)
 1997 36' U295 Sold in 2020, owned for 19 years
  U240 36' Sold to insurance company after melting in garage fire
    33' Foretravel on Dodge Chassis  Sold very long time ago

Re: Fleetguard LF14000NN

Reply #4 –
Looks like the Fleetguard is a better filter since it talks about 30 & 10 micron ratings.

I'll have to swap them out
Frank & Daisy
NO LONGER  "looking for the perfect Foretravel
36' or less non slide preferred."  She has been found and is ours.
2003 U320 36' non slide  Unit 6103
Cummins ISM 450
Allison 4000MH

Re: Fleetguard LF14000NN

Reply #5 –
The latest and greatest fleet guard filter number is LF14002NN I believe.



Keith
The selected media item is not currently available.Keith & Jo
2003 U320T 4025 PBBS Designer series
Build 6203    Cummins 500hp
2000 U320 4010 WTFE / Build 5762 —Sold—
Motorcade #18070   
Pasadena, Texas
2015 Jeep Wrangler Sahara-Sunset Orange pearl coat
Don't argue with a fool, people watching might not be able to tell the difference.

Re: Fleetguard LF14000NN

Reply #6 –
Quote from: turbojack –
One thing to always check when removing the filter is to make sure the gasket did not stay on the engine.  Things don't go good when after changing the oil you see a trail as it goes down the road.


I made this mistake once. Never again type of mistake. It is amazing how quickly you can dump a fresh oil change into your driveway when you have two orings! The worst part is that is was a brand new 5.4 motor I put into a f150. This was the 50 mile break in first oil change.  I was so worried it did damage at the time but 75k later it is still running great!

Re: Fleetguard LF14000NN

Reply #7 –
Left a oil filter housing drain open on a G398 Cat once,100 plus gallons down the drain.
96 U270 BUILD 4810
85 380SL
Drummonds TN.

Re: Fleetguard LF14000NN

Reply #8 –
Quote from: hdff –
The latest and greatest fleet guard filter number is LF14002NN I believe.



Keith
LF14001NN preferred and LF14000NN is standard service filter Per Cummins when I check last month

Begin forwarded message:

From: care@cummins.com
Date: December 2, 2021 at 3:07:51 PM PST
To: Scott Davidson
Subject: EXTERNAL -  ISM oil filter [SR#:1-109869310953]

Scott,

Thank you for contacting Cummins.  The resolution to your inquiry, ISM oil filter, is as follows: You can use the LF14000NN or the LF14001NN which is the upgrade.

 


Engine s/n 35012626
 
Sent from my iPad
 
On Dec 2, 2021, at 11:48 AM, care@cummins.com wrote:
 
Scott,

Thank you for contacting Cummins.  The resolution to your inquiry, ISM oil filter, is as follows: I would need the engine SN to be able to look that up.


I have a 2001 ISM 450 in a Foretravel motorhome.
So I have read that the original filter Number has changed. Can I find out what is the preferred filter to run.
Thank You Scott Davidson

Re: Fleetguard LF14000NN

Reply #9 –
Quote from: John44 –
That gasket goes with the filter,it just was not crimped to the filter good enough.
They are kinda different on the LN14001NN. Seal seams loose and both pushed flat and fits inside filter and around the flange when installing. I doubt you could physically install two. I too had removed a Napa filter and seals are completely different . Napa was a square oring Big and the other was a L shaped seal ring
Scott

Re: Fleetguard LF14000NN

Reply #10 –
Couldn't find stats on the LF14001NN just this.
I imagine the micron rating is the same.
Frank & Daisy
NO LONGER  "looking for the perfect Foretravel
36' or less non slide preferred."  She has been found and is ours.
2003 U320 36' non slide  Unit 6103
Cummins ISM 450
Allison 4000MH
 

Re: Fleetguard LF14000NN

Reply #11 –
Fleetguard Cummins LF14001NN Oil Filter Specifications:
The LF14001NN holds between 11 to 24 grams more contaminants than competitors.
Dust Holding Capacity of 100g, 99% efficient at 30 microns, and 72% efficient at 10 micron.
Largest OD 120.3 mm (4.736 inches)
Standpipe No.
Thread Class 7H.
https://www.cumminsfiltration.com/sites/default/files/LT36781-3-13-2020.pdf
I never ever imagined spending $50 for a oil filter. Crazy expensive