Skip to main content ↑ ↓
Topic: 2001 U320 Slide Adjustment?? (Read 2347 times) previous topic - next topic

Re: 2001 U320 Slide Adjustment??

Reply #60 –
Quote from: WS6_Keith –
Good job on the repair.  Looks like that welding and plate should handle the load for a bit.

I will still recommend that before driving (especially in the rain or through any water) that you seal up that big hole through the inner fender.  When my tire blew, it hit the bottom of the bulkhead and made a small hole.  I used this stuff to patch it...quick and easy to do.  It cures with sunlight, so I laid a mirror down on the ground to reflect to the patch.  I used 4 pieces, but maybe they make a bigger piece to cover your hole.  I lightly sanded the area with 60 grit to rough it up, stuck on the patch and let it cure.  After all were installed, I did black RTV the edges so they were sealed.

Super Glue Permanent Reinforced Polyester Fiberglass Patch #15298,Black -...
Thanks for the suggestion; I have some expanding foam designed for pond repair laying around that I was thinking about squirting up in there for now but maybe I'll go your route.
As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.