Skip to main content ↑ ↓
Topic: Allison fault code and intermittant retarder (Read 723 times) previous topic - next topic

Allison fault code and intermittant retarder

Just an update to my code (D1-4523) showing H solenoid open which results in inhibiting retarder operation. Found a very dirty two pin connector that goes into the area of the H solenoid on the rear of the transmission just next to the dip-stick & oil fill tube area.
 
Sprayed that nasty dirty connector very liberally with Deoxit and used an air nozzle from my portable compressor to blow air across the connector to create a venturi effect to suck out the dirt and deoxit liquid. I did this twice and the connector is clean and shiny.

cleared the codes and off over the mountains (twice) at White pass near Mt. Rainier. So there was a lot of retarder use. And I'm happy to report that the retarder worked like a champ with zero issues.   
Jerry & Nona and Kimeru the cat that thinks she's a dog
1998 36' WTFE U320  #5314 Motorcade #17711
USAF 1975-1995
2019 Subaru Crosstrek 'toad'
2003 Subaru Legacy touring car
jerry Fincher | Flickr