Skip to main content
Topic: How Do I Remove Bedroom Awning  (Read 293 times) previous topic - next topic

How Do I Remove Bedroom Awning

Spring broke and we're away from home.  I want to remove the awning and tube to store it while traveling. It would seem as easy as removing the bolts that secure arms to the body and sliding the top of the awning key out of the channel at the top. Am I correct?
Randy (N4TDT) and Karen Crete
Sarasota, Florida
SOLD:  2000 U270 34' WTFE Build 5756 "Ole Red"

Re: How Do I Remove Bedroom Awning

Reply #1
Don't know about yours, but there is a screw holding the flex key in place that you will have to remove first--if you have the screw like ours.
Nitehawk,  Demolition Lady, & our NEW master, Zippy the speeding BB cat.
1989 Grand Villa 36' ORED
Oshkosh chassis, 8.2 DD V8
2006 Saturn Vue AWD

Re: How Do I Remove Bedroom Awning

Reply #2
Don't know about yours, but there is a screw holding the flex key in place that you will have to remove first--if you have the screw like ours.

Yes, duly noted. Otherwise as simple as sliding key out I assume.
Randy (N4TDT) and Karen Crete
Sarasota, Florida
SOLD:  2000 U270 34' WTFE Build 5756 "Ole Red"

Re: How Do I Remove Bedroom Awning

Reply #3
Dirt might cause binding. Either water or silicone spray will reduce effort to pull out the flex seal.
Nitehawk,  Demolition Lady, & our NEW master, Zippy the speeding BB cat.
1989 Grand Villa 36' ORED
Oshkosh chassis, 8.2 DD V8
2006 Saturn Vue AWD

Re: How Do I Remove Bedroom Awning

Reply #4
After 20 years, you may want to consider just cutting the key strip and replacing with new after the spring is fixed.  The strip is relatively inexpensive and does deteriorate over time.  It is constantly exposed to the elements.  Replacement is pretty straight forward.  You can order the strip direct from zipdee.  I think it does come in a couple of sizes so keep the parts to measure.

Rich
Rich and Peggy Bowman
2002 U270 3610 WTFS, build #5939--"Freedom"
2022 Jeep Grand Cherokee Summit 4xe
SMI AirForceOne brake system
PakCanoe 15

 

Re: How Do I Remove Bedroom Awning

Reply #5
After 20 years, you may want to consider just cutting the key strip and replacing with new after the spring is fixed.  The strip is relatively inexpensive and does deteriorate over time.  It is constantly exposed to the elements.  Replacement is pretty straight forward.  You can order the strip direct from zipdee.  I think it does come in a couple of sizes so keep the parts to measure.

Rich
Rich is absolutely correct. All your flex keys should be changed and this is a great time to do that. Also on my 2001 there was no screw but the aluminum extrusion that it slides into wis crimped to secure. They sell a tool to open but I had good luck with using a tapered 1/4' metal dowel and lightly tapping extrusion to open/uncrimp
I would cut each side back and place a tyrap or wire around them rolled up before you set them free.