Skip to main content
Topic: HWH I/O Com Ribbon location.  (Read 254 times) previous topic - next topic

HWH I/O Com Ribbon location.

Good morning,

HWH system on a 2003 foretravel coach having issues with getting the rear bags to inflate. Had a few fuses that shorted and a slew of power issues ensued. Having pulled all the cans out and tested each fuse both seperated from the fuse block then inserted and found a 7.5 fuse and a few 3amp fuses. Power restored to HWH control panel and all side outs now have power and the HWH panel. My issue now is I may have plugged in the ribbon cable to the wrong port. There are 3 on most cans but need the rear bags ribbon location. The cans just have serial numbers so this will get complicated.

Would anyone have pics or an diagram of the ribbon cable locations for every can. I believe there are 6 or 7 total. There is only one ribbon cable for each can.

818.588.7730 or email me  jasonThirlaway@yahoo.com
Brian and Jen

 

Re: HWH I/O Com Ribbon location.

Reply #1
Brian, I emailed you an HWH electrical diagrams document that I think matches my 2004. It may help.
Bruce & Linda
2004 U295, Build # 6268, ISL400 CAPS
2016 Ford Explorer Sport or 1985 Jeep CJ7