Skip to main content ↑ ↓
Topic: Which delco starter (Read 609 times) previous topic - next topic

Which delco starter

Which starter do I use for my 98 U320 with the M11. Is it the  8200308 or the 8200433?  I have seen both listed for use in M11 engines
Peter    Alberta Canada
'98 U320 40'  Build 5359 M11 450 HP, Aqua hot, Blu Ox

Re: Which delco starter

Reply #1 –
My 2003 used the 8200308.  Here's the differences:

Part Number:  8200433
Pinion Teeth:  12
Pinion Pitch:  8/10

Part Number:  8200308
Pinion Teeth:  11
Pinion Pitch:  6/8
Keith
2003 U320 38' #6197

Re: Which delco starter

Reply #2 –
My guess is I will have to contact Cummins as I have no idea about the differences...
Peter    Alberta Canada
'98 U320 40'  Build 5359 M11 450 HP, Aqua hot, Blu Ox

Re: Which delco starter

Reply #3 –
If your starter is off count the teeth and follow Keith's chart and you know. I just took my old
starter in to get it rebuilt and walked out with a new starter so I didn't have to look up anything.
Peter and Frieda Morin
1999 36ft. U320 Foretravel
Build # 5436
1998 Suzuki Sidekick Sport

Re: Which delco starter

Reply #4 –
As it takes a bit longer to get starters here, I am going to wait until I am not going anywhere to take it off and do the waiting game for the new one
Peter    Alberta Canada
'98 U320 40'  Build 5359 M11 450 HP, Aqua hot, Blu Ox

Re: Which delco starter

Reply #5 –
ISM starter Delco 8200308

Re: Which delco starter

Reply #6 –
Quote from: dicksop –
As it takes a bit longer to get starters here, I am going to wait until I am not going anywhere to take it off and do the waiting game for the new one
Even with all the supply chain problems, I would think that whichever one you decide to get, there should be many on the shelf in Edmonton.  These are very common starters.
Dave and Kelli
1997 U295 40' Build #5188 CSGI
1995 U240 36' Build #4621 SBID-SOLD
2006 Jeep Wrangler Rubicon

Re: Which delco starter

Reply #7 –
I love the gear reduction starter - Delco 8200308 - in my 2000 u320. The M11 starts so much better with it.
Dan & Lauren - Pine Ridge, FL
2000 U320 42 CAI
Build #5766
 

Re: Which delco starter

Reply #8 –
Find a Part | Delco Remy

I used 8200433 . I was able to look at mine while it was on the engine to get the part number then searched at the link above. I referenced Scott's writ up he posted as well, that was helpful. Few things- 1) like Scott, I did have to get a small extension cable for the positive Amazon.com: 4/0 AWG Gauge Red + Black Pure Copper Battery Inverter Cables... 2) I had to enlarge the new cable connector with a drill bit so it would fit the post of the starter and 3) I had a spacer that I had to reuse see this Remy Delco Starter Install Wiring question

The end result is quite noticeable, you'll be pleased.
As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.
Jason
2000 U295 36' Non-slide  ISC350