Skip to main content
Topic: Hart interface Link 2000 (Read 195 times) previous topic - next topic

Hart interface Link 2000

I am still running the factory original battery/ charging, link 2000.
Here's the question I have 750 amp hours of AGM batteries. For monitoring the link wants to know the amp hour capacity of the battery bank. Right now mine is set at 325 Ah (50%) DOD. In reality should it be set at 750AH
Bruce, Linda, and Macy
Zoey RIP 1/20/19
1999 U295 40' build #5400
2017 silver Jeep Wrangler, 1260 watts of solar on top
Moving around the country

Re: Hart interface Link 2000

Reply #1
I would set it for 750 AH
Peter and Frieda Morin
1999 36ft. U320 Foretravel
Build # 5436
1998 Suzuki Sidekick Sport

Re: Hart interface Link 2000

Reply #2
What Peter said.
Richard & Betty Bark & Keiko our Golden Doodle
2003 U320T 3820 PBDS
Build # 6215
MC # 16926
2016 Chevrolet Colorado 4X4 diesel

Re: Hart interface Link 2000

Reply #3
I had the same question last week when programming my Victron Multi and color control.
I have a total of 4000 amps at 6 volts with my Lifeline battery's, 400 amp hr @20% each x 10.
I adjusted to 12v so I have 2000 amps @12v. At a 50% discharge I have 1000amps.

I contacted Bay Marine supply where I bought my Victron equipment. I was advised to set the battery capacity to 2000amps.
1995 U320C SE 40'
Jeep 4x4 Commander - Limited - Hemi
"The Pack"  Yogi and Diesel our Airedales -  Charlie our Boxer/Akita mix. Gone but NEVER forgotten Jake our yellow Lab.
NRA Law Enforcement Firearms instructor - Handgun/shotgun
Regional Firearms instructor for national Armored Transp. Co.

 

Re: Hart interface Link 2000

Reply #4
Well found my issue, one of my 8D AGMs has a problem. Took it out of the system everything back to normal. I'll run in the other 2 this summer and do lithium when I get back to Yuma this fall.
Bruce, Linda, and Macy
Zoey RIP 1/20/19
1999 U295 40' build #5400
2017 silver Jeep Wrangler, 1260 watts of solar on top
Moving around the country