Skip to main content ↑ ↓
Topic: Hwh wont go into level mode reset procedure. (Read 381 times) previous topic - next topic

Hwh wont go into level mode reset procedure.

Hwh will go in travel mode, all up or all down. It will not go into auto level or manual level modes. Did this once before. Then I searched the forum and found a procedure to reset. I can not find it now.  It seems like you started the engine maybe put it in gear and then shut off the engine with it in gear.  Or something simular was super simple and fixed my problem. If someone knows what I am talking about I will print it out for future reference.
Tom and Michelle 2004 U270 36WTFS

Re: Hwh wont go into level mode reset procedure.

Reply #1 –
Can you search for your previous post with the problem and find the solution that way?

Rich
Rich and Peggy Bowman
2002 U270 3610 WTFS, build #5939--"Freedom"
2022 Jeep Grand Cherokee Summit 4xe
SMI AirForceOne brake system
PakCanoe 15

Re: Hwh wont go into level mode reset procedure.

Reply #2 –
I can remember when I was having an issue with HWH leveling, starting the engine. releasing the parking brake and then setting it again allowed me to reset HWH.  I can't swear that was what fixed it, but worth a shot.
Joe Phebus and Jaime Trujillo
2002 U270 3410  Build: 5953 Motorcader # 18595
2100 W Solar, 600 AH Battleborn Batteries,  Victron Multi-Plus II 3000 Inverter, Cerbo GX, & MPPT Chargers
1992 Geo Tracker
 

Re: Hwh wont go into level mode reset procedure.

Reply #3 –
Thanks Rich and Joe. I didn't previously post about this I just found by searching. As far as what Joe was suggesting the procedure was something similar , for sure that simple. After doing several tries at doing those type procedures it started working properly. Unfortunately I'm not sure what actually "fixed" my problem.  Tom
Tom and Michelle 2004 U270 36WTFS