Skip to main content ↑ ↓
Topic: How To Safely Remove Windshield Wipers  (Read 364 times) previous topic - next topic

How To Safely Remove Windshield Wipers

  :help: Need to remove DS windshield wiper to adjust swing. Currently wiper travels too far to the street side and bangs into the windshield. Removed the two nuts, but unable to pry arm from splined shaft. Do I need the help of a special tool?  I tried using a flat pry bar but it wouldn't budge. Don't want to break something requiring taking the dash apart to replace the wiper motor/gear assembly.  Thanks.
David & Sherry Kendrick
"Gizmo" The Doggy Lama
USAF(Ret) 1971-75; 1979-95 (20 yrs)
2003 U320 F03 [6179] 38PBDS (3/2016)
2016 Chev Silverado Z71 LTZ
Motorcade 17738
--------------------------------------
New Horizons 5W 25' RKS (1/2004 - 3/2016)
2003 Chev Silverado 2500HD Duramax
Tent (5-person) White Stag (1972 - 2003)

Re: How To Safely Remove Windshield Wipers

Reply #1 –
Try a gear puller
Rudy Legett
2003 U320 4010 ISM 450 hp
2001 U320 4220 ISM 450 hp
1995 U320 M11 400 hp
1990 Granvilla 300 hp 3208T
Aqua Hot Service Houston and Southeast Texas

Re: How To Safely Remove Windshield Wipers

Reply #2 –
You might need to tilt the wiper away from the windshield and then try to remove from the splines.  On cars it works this way and believe it does the same on the coach.  It is a safety.  You may, however, have a nut on the wiper motor assembly under the dash that is loose and causing the wiper to hit the post. That is what happened to mine, just an FYI!
Joe & Dottie Allen
Sold!  December 2023.      2000 U320; build # 5645
Our coach " Maxine"
Motorcade #  15922;  Escapee 150950; FMCA F330833; Boondockers Welcome;  Harvest Hosts;  Thousand Trails
'98 U320 from 2000-'06
USAF '62-'66

"Do not spoil what you have by desiring what you have not; remember that what you now have was once among the things you only hoped for." ―Epicurus

Re: How To Safely Remove Windshield Wipers

Reply #3 –
Also spray the spline with some wd 40 or similar.
Dub McBride 1996 270

Re: How To Safely Remove Windshield Wipers

Reply #4 –
I loosen the nut and the put something under to pry and then hit the nut with a hammer.
Peter and Frieda Morin
1999 36ft. U320 Foretravel
Build # 5436
1998 Suzuki Sidekick Sport

Re: How To Safely Remove Windshield Wipers

Reply #5 –
I tried some silicone spray lubricant, but no cigar. I have a steering wheel remover tool, but it's too big.  Researched gear pullers on Amazon. They have a special gear puller for battery posts and wiper removal. Who knew?  Thanks for the replies. 
David & Sherry Kendrick
"Gizmo" The Doggy Lama
USAF(Ret) 1971-75; 1979-95 (20 yrs)
2003 U320 F03 [6179] 38PBDS (3/2016)
2016 Chev Silverado Z71 LTZ
Motorcade 17738
--------------------------------------
New Horizons 5W 25' RKS (1/2004 - 3/2016)
2003 Chev Silverado 2500HD Duramax
Tent (5-person) White Stag (1972 - 2003)

Re: How To Safely Remove Windshield Wipers

Reply #6 –
Quote from: WagonWheels –
I tried some silicone spray lubricant, but no cigar. I have a steering wheel remover tool, but it's too big.  Researched gear pullers on Amazon. They have a special gear puller for battery posts and wiper removal. Who knew?  Thanks for the replies.

The one for wipers doesn't work on our coaches. I have one and can use it on cars.
1999 40 ft. U-320 wtfe build 5563 Chuck & Lynda's "Rollin' Inn"  2030 watts solar
prev. mh's 71 GMC 5 yrs. 73 Pace Setter 1 yr. 78 Vogue 5 yrs 81 FTX 40ft all electric 18 yrs. 1996 Monaco Signature 3 yrs.
2014 Grand Cherokee Overland
Dream as if you will live forever. Live as if you will die today.  James Dean
 

Re: How To Safely Remove Windshield Wipers

Reply #7 –
Quote from: WagonWheels –
I tried some silicone spray lubricant, but no cigar. I have a steering wheel remover tool, but it's too big.  Researched gear pullers on Amazon. They have a special gear puller for battery posts and wiper removal. Who knew?  Thanks for the replies.
The puller you use may have a centering cone on the end of the shaft. Just put a small nut to act as a bushing so as not to damage the shaft. Once removed there is a cir-clip and a thin flat washer that can be removed to facilitate lubing the dry shaft.