Skip to main content
Topic: Hydraulic Pump "Tensioner and Belt " part numbers? (Read 340 times) previous topic - next topic

Hydraulic Pump "Tensioner and Belt " part numbers?

Does anyone have the part numbers for a replacement belt and tensioner on a 99 U270 with the 350hp engine?
I think I have a little too much rapid movement in the tensioner at idle, and the way things are at the moment, I better do all I cal to make sure the pump is not been damaged by bad lateral load forces.
Thanks
David
David & Emma Roche
Dino (Golden Doodle)
1999 U270 WTFE 36' Build # 5534
Xtreme "Lights, Stripes & Roof"
Motorcade# 18321
Dayton, Ohio
Towd: Jeep Grand Cherokee
Two Townie Electra Bikes

Life is made to enjoy, the Foretravel helps!

Re: Hydraulic Pump "Tensioner and Belt " part numbers?

Reply #1
On Beamalarm 1999 U270 8.3 Cummin

http://beamalarm.com/Documents/replacing_hydraulic_pump_tensioner.html

 

Belt Gates K080465
        NAP 25-0604650

TENSIONER
                    GATES 38504

There a video on his site
Rick & Hilda looking forward to full- timing one day for now couple of months at a time
1999 U270 3602
Built number  5530.  Feb 1999            Motorcade  number 18438
8.3 Cummins Allison six speed with brake  retarder
Purchased Nov 28 2019

Re: Hydraulic Pump "Tensioner and Belt " part numbers?

Reply #2
Rick
Thank you!
Will get it ordered this evening, keep warm up there!
Danid
David & Emma Roche
Dino (Golden Doodle)
1999 U270 WTFE 36' Build # 5534
Xtreme "Lights, Stripes & Roof"
Motorcade# 18321
Dayton, Ohio
Towd: Jeep Grand Cherokee
Two Townie Electra Bikes

Life is made to enjoy, the Foretravel helps!

Re: Hydraulic Pump "Tensioner and Belt " part numbers?

Reply #3
Here's another verification of the part numbers with a bit more additional info:

Part Number Collection

1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"

Re: Hydraulic Pump "Tensioner and Belt " part numbers?

Reply #4
Got the replacement tensioner and "green" belt on the way. Amazon was really well priced, the tensioner on Amazon has only gone up $2 in 10 years to $101, and the belt has doubled to $54.
Thanks for the advice and the part numbers.
The comments on the heavy duty belt: is well worth  the extra $15.
I figure anything that may extend the pump life is worth the effort!
David & Emma Roche
Dino (Golden Doodle)
1999 U270 WTFE 36' Build # 5534
Xtreme "Lights, Stripes & Roof"
Motorcade# 18321
Dayton, Ohio
Towd: Jeep Grand Cherokee
Two Townie Electra Bikes

Life is made to enjoy, the Foretravel helps!

Re: Hydraulic Pump "Tensioner and Belt " part numbers?

Reply #5
Rockauto has the best price on the tensioners, BUT unless your ordering some other stuff there at the same time, you do have to pay shipping.

More Information for GATES 38504
Mike in AL
2001 U295
8.3 ISC 350
Build 5918

 

Re: Hydraulic Pump "Tensioner and Belt " part numbers?

Reply #6
Remember when shopping for parts, be very careful to get OE quality parts.  Way too many of the "replaces ...." , may be cheap, and ARE cheap.

Yes, it is getting harder and harder to tell what is a knockoff part and what is OE quality.  If the prices is "too good to be true", it probably is.
Brett Wolfe
EX: 1993 U240
Moderator, ForeForum 2001-
Moderator Diesel RV Club 2002-
Moderator, FMCA Forum 2009-2020
Chairman FMCA Technical Advisory Committee 2011-2020