Skip to main content ↑ ↓
Topic: Bedroom HWH slide sensor switch. (Read 231 times) previous topic - next topic

Bedroom HWH slide sensor switch.

Where o where is that switch that tells the HWH that the slide is in?  Have E-W oriented bedroom.  Have had several incidents where the room is in but can't get the transmission to go into gear.  Recycling has so far allowed driving but.......

thanks

Jerre
Jerre and Kathy Griffin
2003 U320 4220 Special
Build # 6207
2022 RAM Laramie 4X4 EcoDiesel
2002 Country Coach Magna 37 Tag- Forever Coach-Died in fire 7/23
1997 Country Coach 32 Intrigue-No slides-Wonderful

Re: Bedroom HWH slide sensor switch.

Reply #1 –
Our previous 02 Windsor had slim s/s device on front of slide that indicated slid was in Hope that helps
Leonard and Sherry Casteen                             
1998 u295 36'   
Build # 5257                     
2001 Jeep Cherokee                                             
Springdale SC                                       
Australian Labradoodle    Ginny

Re: Bedroom HWH slide sensor switch.

Reply #2 –
The thick bedding on our bed interfere with the slide coming in that last little bit enough to cause the same trouble. Once I recognized it we would flip the bedding up onto the bed and never had another issue! Talk about an easy fix...
That was in our previous 06 Nimbus not our current 04 295....
Tyson
2004 295 3610 WTFS
2010 Honda CR-V
Motorcade #18344
AA1DS
 

Re: Bedroom HWH slide sensor switch.

Reply #3 –
We have the same bed, the bedroom slide should be on side by closet (rear) of the frame. The sensors are magnet and our out sensor
was loose or movable, we had to sturdy it with a board.  Also if you have not checked your bolts under the bed on the slide, they are famous for breaking.
Ellen & David
2005  U320  4030  PBTS
2017 GMC Acadia
MC# 16978 Build #6330