Skip to main content ↑ ↓
Topic: 2003 U295 Generator Removal (Read 214 times) previous topic - next topic

2003 U295 Generator Removal

Has anyone removed their generator POWERTECH 10 KW OR 12 KW from a 2003 U295 or a generator that's in a quite box and do you a have any tips? I'm thinking about removing mine and doing a major service.

Mike & Donna Mariana + Angel & Rusty
2003 U295 3620
Build# 6118
2021 Jeep Wrangler 392
 

Re: 2003 U295 Generator Removal

Reply #1 –
Just removed my generator from my 01 320.... I rebuilt the box, replaced the isolators, hoses, water pump, belt, and then on the generator head cleaned it and replaced the end cap bearing.
As far as removing the entire unit, or course the fuel lines, starter wires and exhaust disconnected. I'd suggest using a forklift..... it's heavy! When it's pulled out enough, then you can disconnect the wires in the control box. Mark everything, take pics of everything. It is a large task, but if you're mechanically capable and Not scared, you can do it.
2001 36' U320 Build 5901
2001 LX470