Skip to main content ↑ ↓
Topic: Audit system monitor  (Read 320 times) previous topic - next topic

Audit system monitor

I still have the original equipment audit monitor.
The screen lights up so it has power, but nothing is displayed. Any ideas.
Thanks
Rick & MJ Berry
1998 U320 40'
Ohio

Re: Audit system monitor

Reply #1 –
I replaced mine with a flat-screen LCD monitor. They are widely available (on Amazon and various other sites) and are easy to adapt electrically. I mounted mine on the front of the panel over the hole left by the original and fabricated a small aluminum plate to go behind the panel to which the new monitor can attach. If you have the luminescent dash be careful not to drill holes in it.
David and Carolyn Osborn
1995 U320C SE 40' Build 4726 Feb 1995
FMCA 147762
Motorcade 17186
 

Re: Audit system monitor

Reply #3 –
I did as David and then changed out my camera as well. You will have a BNC connection to the original monitor, you will need a BNC to RCA adapter for the new monitor. With an adapter you could test drive your system by running it to the composite input of TV. If the Audit system has died, then the Seelevel upgrade makes sense.
1998 36 foot U270 Build No. 5328 WTFE, 900 watts solar, Victron controller, B2B, bat monitor, 600 AMPH lithium with 2018 Chevy Colorado toad, SKP #110239, Motorcade #17781, 2021 Escape 17B for when Coach is broken down and campsites are too small, retired and full-timer since Dec. 2020. Part of RV family since 1963.