Re: Today is THE day!
Reply #30 –
If you are not getting any sparking it will not light. That could be caused by a bad circuit board. Check if the gas valve is getting 12 volts when the switch is first turned on, if it is not getting 12 volts see if 12 volts are coming out of the circuit board and if 12 volts there, could have a bad thermostat or eco. Sound like you need some help on this job. Do not stick anything into the orfice as it is supposed to be a certain size. If you screw the orfice out of the gas valve, you ca look at the inside of the orfice and might find some gnats have plugged it up, I don't know how they get in there, but you can use air pressure to blow them out and then reinstall the orfice. You can pm me or call me at 813-215-3463 and I can walk you through how to troubleshoot the water heater