Skip to main content
Topic: Removing the head banger cabinets along the bed ? (Read 2070 times) previous topic - next topic

Re: Removing the head banger cabinets along the bed ?

Reply #25
Nitehawk!! NO, NO, NO--Don't say it!!! Behave myself!! >:D  >:D
Nitehawk,  Demolition Lady, & our NEW master, Zippy the speeding BB cat.
1989 Grand Villa 36' ORED
Oshkosh chassis, 8.2 DD V8
2006 Saturn Vue AWD

Re: Removing the head banger cabinets along the bed ?

Reply #26
OK, I'm back. Can't help myself!!
If you ride a bicycle try wearing your bike helmet--just while making the bed. Better than seeing stars in the daytime!
Before I remodeled our overhead above the dash I would hit my head EVERYTIME I was working up front around the dash (takes a lot of knocks before I learn) so I wore a thick hat while up there until I reduced the TV enclosure flush with the rest of the o'head cabinets.

One can even see the steel bracing I put up inside the cabinet to hold our 32" TV.
Nitehawk,  Demolition Lady, & our NEW master, Zippy the speeding BB cat.
1989 Grand Villa 36' ORED
Oshkosh chassis, 8.2 DD V8
2006 Saturn Vue AWD

Re: Removing the head banger cabinets along the bed ?

Reply #27
Mike,

Sounds like a done deal. It's your coach and there is no committee that has to

approve mods to it. Get the Sawzall and a sledge hammer and go to it.

Carter-

Re: Removing the head banger cabinets along the bed ?

Reply #28
It's yours 'til it isn't yours. Do what ever makes you happy.
Use a chainsaw or a jackhammer or a blowtorch or a wrecking bar. Until it is the way you want something, and it belongs to you, go ahead and alter it.
When I change something it is to make the DW happy--or me, not what some stranger thinks.
Nitehawk,  Demolition Lady, & our NEW master, Zippy the speeding BB cat.
1989 Grand Villa 36' ORED
Oshkosh chassis, 8.2 DD V8
2006 Saturn Vue AWD

Re: Removing the head banger cabinets along the bed ?

Reply #29
You could think about a divorce, my DW is 5' 2" and has no problems back there. Me?, I'm 6' 2", but since I snore (loudly), I am relegated to the forward fold-out couch.
1993 U-240 "La Villa Grande"..CAT 3116 w/ Pacbrake PRXB...Allison 3060 6-speed..
Previous: 1983 Airstream 310 turbo diesel, 1979 Airstream 280 turbo diesel
                                      Build # 4297
                                      PNW natives
                      Home base:  'Cactus Hug' (Ajo, Arizona)
                        DW Judy & Chet the wonder dog
                        Full-Timers 'Sailing the asphalt sea'

Re: Removing the head banger cabinets along the bed ?

Reply #30
Shhhh Mike!! Don't give my wife any ideas!! ::)
Nitehawk,  Demolition Lady, & our NEW master, Zippy the speeding BB cat.
1989 Grand Villa 36' ORED
Oshkosh chassis, 8.2 DD V8
2006 Saturn Vue AWD

Re: Removing the head banger cabinets along the bed ?

Reply #31
Mike, do yourself a favor and buy an oscillating saw. The fien brand multi tool is a percsion saw, whose Patent has expired, so there are some are some cheaper Alternatives. You can easily make precise plunge cuts and the blade position can adjusted to a multitude of positions to cut in very cramped locations. With diamond blades you can use your fingers to steady and guide the cutting edge of the blades and not splinter the edges much. Blades are offset so you can almost cut flush against another surface. Totally amazing tool that you will find so many uses for around the house, in the coach or in your race and fabrication shop. Very little blade jump, kickback or chatter. Total control of the cutting edge
Old Phart Phred, EIEIO
89 GV ored 36' #3405 300 hp cat 3208 ATAAC side radiator, mountain tamer exhaust brake

Re: Removing the head banger cabinets along the bed ?

Reply #32
Put painters tape where you are going

to cut, it prevents splintering the wood.

Carter-

Re: Removing the head banger cabinets along the bed ?

Reply #33
Only had a n issue once. Raised up from looking at the safe. That is the 1st time I was in the coach. That was the last time I hit my head again. Sore head equals lesson learned.
The impression in the fabric if removed, can be steamed out easy. With a wet towel, and a hot iron. Did mine in the front from the TV cabinet removal.
It also works on carpet like magic, when you move furniture.
Chris and Tammy White  CDA Idaho
Previous owners 1997 U295 36' 3126 Cat 300 HP Build # 4998
Former Foretravel tech & RVIA certified tech
Former owner Custom Satellite home/RV satellites 
Former owner Vans LTD  van conversions
Unemployed, panhandler, drag racer NHRA #6348