Installing PowerTech Gauges - Page 2

Skip to main content ↑ ↓

Topic: Installing PowerTech Gauges (Read 1447 times) previous topic - next topic

Re: Installing PowerTech Gauges

Reply #25 – August 03, 2017, 05:57:21 pm

Thanks, since we have the Isuzu, our setup is different. No need for you to document more. I will look for an unused oil pressure port on our engine.

Re: Installing PowerTech Gauges

Reply #26 – August 03, 2017, 08:17:25 pm

Quote from: Caflashbob – August 02, 2017, 01:35:36 pm

Maybe that's both the reason the GV coach did not have gen gauges and/or they moved the gen to the front on the Unicoach.

Or none of the above...

Yes ... Calflashbob.... Maybe all of the GV's with a generator setup like mine run a little hot while traveling, if it doesn't quite reach the shutdown temp, then one would not know unless they installed their own gauges.

Re: Installing PowerTech Gauges

Reply #27 – August 04, 2017, 12:44:53 am

Sometimes the best/worse thing is the gauge.

I ran across a SOB customer that had a coach that all had heating issues.

He brought his coach over to show me that the factory had fixed it.

The factory bent the needle lower on the temp gauge.

Affiliate Notice

ForeForums is user-supported. When you purchase through some links on our site, we may earn an affiliate commission at no cost to you. As an Amazon Associate I earn from qualifying purchases.