Re: Power to tv antenna Reply #20 – September 17, 2017, 10:10:18 pm You should have a control box in the area of the vcr or bose to choose which signal to the tv Quote Selected
Re: Power to tv antenna Reply #21 – September 18, 2017, 07:35:09 am Another question Is the TV Digital signal ready? If it is the original one it might not be setup for a digital signal without a convertor box. Maybe previous owner tried changing antenna thinking that would pull in the digital signals but TV is not capable of it? Just a thought. Quote Selected
Re: Power to tv antenna Reply #22 – September 18, 2017, 08:59:21 am On MINE, it was the short cable from the roof up the arm to the antenna. You might try replacing that FIRST with a test cable. It's the easiest. Quote Selected
Re: Power to tv antenna Reply #23 – September 18, 2017, 11:13:35 am I found that the metal pass through plate on my roof was corroded and would not sent current through it. I found this out when I ran a new cord directly from the Jack head to the amp- everything worked fine ( Twigs idea above). I then had to decide how to deal with the pass through connection plate- can be replaced ( possible big hole in roof, maybe leaks) or I can directly run the new cable through the roof. I chose option #2, bored a hole in the roof. passed the new coax through it, tested all connections, etc, then sealed the hole on the roof with Dicor. I have eliminated a connection that could go bad and it has been working fine ever since. Best of luck with this Quote Selected
Topic: Power to tv antenna