Skip to main content ↑ ↓
Topic: Shock replacement (Read 1086 times) previous topic - next topic

Re: Shock replacement

Reply #20 –
Think I am going to change out the fronts first. We had a bit of porpoising down the road that I found uncomfortable at times. Will change out the rears later on. They are still on backorder till October. I am in no hurry though.

Re: Shock replacement

Reply #21 –
Bob,

If your current shocks are the red-brown adjustable Konis, you can sure try adjusting them.  The adjustment affects dampening on REBOUND ONLY.  So it does not stiffen the ride, but reduces porpoising.

Adjustment takes no tools and is described on Koni-NA's website.

Re: Shock replacement

Reply #22 –
Don't remember which ones Bob had.

Re: Shock replacement

Reply #23 –
As I recall, OE was the adjustable Konis.  The PN will be stamped on them. Red-brown color suggests adjustable.

Re: Shock replacement

Reply #24 –
Quote from: Bob and Julie –
Think I am going to change out the fronts first. We had a bit of porpoising down the road that I found uncomfortable at times. Will change out the rears later on. They are still on backorder till October. I am in no hurry though.

porpoising can be a loading or weight distribution issue.

Re: Shock replacement

Reply #25 –
They are the original red ones. Don't think weight was a issue, fuel and water was low, bays were not full . But going down some roads it was noticable. Figure change it now is better than later.

Re: Shock replacement

Reply #26 –
Adjusted the oems twice,  then had the FSD Konis installed.  Fixed.  Forever warranty.  Register them with
Koni.

Re: Shock replacement

Reply #27 –
Did shocks and made a big difference on side to side and bucking. Mine had 220k ish miles.. did airbags and another major improvement ..