Skip to main content
Topic: Contitech airbags on sale (Read 3195 times) previous topic - next topic

Re: Contitech airbags on sale

Reply #25
We ordered 8 for our coach which I think are the originals.
Now I need to find a tutorial to install them
I posted one with photos so see it you can find it. I can't search tonight. Get all your ducks in a row beforehand and It's pretty easy.

Pierce
Pierce and Gaylie Stewart
'93 U300/36 WTBI
Detroit 6V-92TA Jake
1140 watts on the roof
SBFD (ret)

Re: Contitech airbags on sale

Reply #26
Thank you everyone for the heads up. Ordered 8 for 698.03 out the door. TAKE10 discount code still valid.
Robert and Josie Parker
2003 U320 40' Build 6132
2015 Jeep Grand Cherokee
Oakwood, Texas

Re: Contitech airbags on sale

Reply #27
You can reuse the old fittings but have a few new Dot rated ones just in case,and check for leaks,and keep at least one for a spare.
96 U270 BUILD 4810
85 380SL
Drummonds TN.

Re: Contitech airbags on sale

Reply #28
Are the Contitech AS9448 the correct air bags for a 2001 U295 36' with slide?  I noticed Roger ordered a set, would mine be the same ?
Mark & Bev
2001 U295 36' Slide
Cummins ISC 8.3 350HP
Build #5802
Jeep Wrangler Toad

Re: Contitech airbags on sale

Reply #29
Thank you everyone for the heads up. Ordered 8 for 698.03 out the door. TAKE10 discount code still valid.
Here is my old page on the airbag installation with a photo of the adjustable safety stands and a link to the Google Photos page. You don't have to make the special tool for the nut if you pull the fenders. I was stubborn and made the tool. The air/hydraulic jack from Harbor Freight takes 50% off the installation time. I made a plate for the top of the jack so it was secure. Your onboard air will be fine to operate the jack. A 3/8" or 1/2" air gun makes taking the bottom nuts off the airbag a 10 second job for each bag. Hey, 50% done right there. All the nuts except the hollow air stud take a 3/4" or 19mm socket. A couple of extension for the air gun make it even easier. Goggles should be worn when working below the bags. small hole in rear front airbag  This post will get to started and linked to the photos.

You should look first to see if the nuts are rusty/corroded and if so, use something like Liquid Wrench the day before. Some shops use a Sawzall to cut the bags off but unless they are frozen from corrosion, that's sloppy work.

Since the bags don't come with nuts, I keep a bag full of stainless nuts and washers to put on the new bags. Use the right tool to take the fitting off the top of the airbag. If necessary, put the bag in a vice to hold it and remove the air fitting without damaging it. It will come off nicely and without damage if you don't rush it.

When I installed the old air fitting in the new bag, I used teflon paste, not tape. I try not to use tape on anything.

I made custom safety stands that easily adjust. I just use a 3/8" impact to quickly extend them so there is no accident.

I found that aligning the air hose fitting with the air bag fitting was harder than I thought. It has fine threads and has to be exactly aligned or the hose nut won't thread on. Never force it as once it's aligned, the nut threads on very easily with just your fingers.

20 ton HF air jacks can be had for $59 when on sale and with the 25% coupon. The 12 ton will work but for the same price when on sale, I went with the 20 ton. They can be used with the regular handle also. Make sure the quick air connect is the same as your hose.

I didn't use a torque wrench on anything. Just shade tree torque.

When I say "ducks in a row," that also means the coach level and best on concrete with wheels chocked so it can't possibly roll. Good to have an observer to help and in case of an accident.

Two guys with experience and air tools can change a bag in well under 15 minutes. Just don't hurry on removing the old air fitting on the top of the bag. Water pump pliers don't make it. If I have to remove a fender, I have a 18V Makita 1/4" impact with a Philips quick bit that works really well for that and a million other things around the coach.

Pierce
Pierce and Gaylie Stewart
'93 U300/36 WTBI
Detroit 6V-92TA Jake
1140 watts on the roof
SBFD (ret)

Re: Contitech airbags on sale

Reply #30
Thanks for the find.  We were able to order 8 bags for $698.03 using the TAKE10 code.  We will work on them when we return to Florida. 

Question, will it be advantageous to change the shocks at the same time?
Thanks in advance,
John M.
John & Carm Morales

"We travel not to go anywhere, but to just go.  We travel for travel's sake.  Our great desire is to move."

Re: Contitech airbags on sale

Reply #31
It will save you a lot of labor time if you do the shocks at the same time.
1999 40 ft. U-320 wtfe build 5563 Chuck & Lynda's "Rollin' Inn"  2030 watts solar
prev. mh's 71 GMC 5 yrs. 73 Pace Setter 1 yr. 78 Vogue 5 yrs 81 FTX 40ft all electric 18 yrs. 1996 Monaco Signature 3 yrs.
2014 Grand Cherokee Overland
Dream as if you will live forever. Live as if you will die today.  James Dean

Re: Contitech airbags on sale

Reply #32
I kinda thought so.  Thanks for the input Craneman.
John M.
John & Carm Morales

"We travel not to go anywhere, but to just go.  We travel for travel's sake.  Our great desire is to move."


Re: Contitech airbags on sale

Reply #34
Looks like they only have 3 left at that price. I guess I'll have to wait to they get some more in. No big rush.
Mike (Shelby the wonder dog)
2003 U320 (Barry Beams old coach)
2012 Honda CRV

Re: Contitech airbags on sale

Reply #35
Just got an email from find it parts.
They no longer have the bags.
Refund within 72 hrs
Frank & Daisy
NO LONGER  "looking for the perfect Foretravel
36' or less non slide preferred."  She has been found and is ours.
2003 U320 36' non slide  Unit 6103
Cummins ISM 450
Allison 4000MH

Re: Contitech airbags on sale

Reply #36
Probably losing money on them
1996 U295-36, Cummins 300hp, 8.3. Build number 4864. Vin number 1F97D536XTNO54271. Purchased October 31, 2019.

Re: Contitech airbags on sale

Reply #37
I just got a cancelation email on my order.
Disappointed with them.
John M.
John & Carm Morales

"We travel not to go anywhere, but to just go.  We travel for travel's sake.  Our great desire is to move."

Re: Contitech airbags on sale

Reply #38
Come on now. Factories, transportation, etc are going to be slower and more sporadic than pre-Covid. We don't always get what we want when we want it. There is a national emergency for Covid, fires in the West and the huge amount of damage from the hurricane.

Pierce
Pierce and Gaylie Stewart
'93 U300/36 WTBI
Detroit 6V-92TA Jake
1140 watts on the roof
SBFD (ret)

Re: Contitech airbags on sale

Reply #39
Blacktech RML 79448 C — Air Bag Suspension and Air Springs for Semi Trucks -...

Amazon.com: Blacktech RML 79448 C - Replacement Air Spring: Automotive

Blacktech "The Reliable"
As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.

Re: Contitech airbags on sale

Reply #40
The ebay ad has only 2.  8 from Find-It-Parts were just over $90 each delivered. And they have been delivered already.

I have had very good results with this vendor for a variety of parts,

John, call,cust service and try ordering again.  They may be temporarily out of stock.
Roger Engdahl and Susan Green
2001 U320 3610 #5879 (Home2) - 2014 Jeep Cherokee or 2018 F150
Hastings, MN

Re: Contitech airbags on sale

Reply #41
I just got a cancelation email on my order.
Disappointed with them.
John M.
I understand your disappointment. 

I do not know for certain, but it seems like FindItParts is more of a consolidator for lack of better term, than a true supplier of parts....providing a consolidated internet store front for lots of suppliers.  I have ordered from them many times (including Conitech airsprings) and have always received prompt service, but seems like the parts ship from various locations.  I had issues on one order where an item showed as being shipped but it was not.  Contacted them and they resolved it quickly.

I can also say from experience that inventory systems frequently do not reflect the actual available quantity.  Multiple times I have gone to Home Depot and Lowes for items that showed in stock and they are not able to find it.  One of the items was a 6ft folding table.  They showed several in stock, but could not find them.  Not sure how something that big gets lost,  I guess it is pretty easy to loose items in a large warehouse.
40ft 1997 U320

Re: Contitech airbags on sale

Reply #42
I ordered 2 on 8/26 and they were delivered today.

2000 GV320 4010 build #5712  2019-?
1999 Bounder 2000-2008
Bardstown, KY
🥃The Bourbon Capital of the World🥃

Re: Contitech airbags on sale

Reply #43
Looks like we need a volunteer for the Blacktech ones,any takers???
96 U270 BUILD 4810
85 380SL
Drummonds TN.


Re: Contitech airbags on sale

Reply #45
Ordered and replaced all of mine on my 96 U295.

Great bags on a great deal. Definitely worth taking the front skirt off to replace with ease. Takes 20 minutes to pull.

Re: Contitech airbags on sale

Reply #46
Mixing Airbag Brands

I ordered eight ContiTech airbags from FindItParts while we were in Wyoming.  When I got home I discovered they had shipped only six.  They said that was all they had but they still charged me for eight.  They are going to refund the price for two. No more are available for the time being.

So I can get Firestone w01-358-9448 for more money, free shipping.

Can I get two of these and use one Firestone and one Conti on each side?  Front or rear better?  Or two Firestone on one side and two Contis on the other?

It is hard to see any down side.  Any best way to mix them or should I get four Firestones?

I have ordered several different parts from FindItParts and they have been reliable. 
Roger Engdahl and Susan Green
2001 U320 3610 #5879 (Home2) - 2014 Jeep Cherokee or 2018 F150
Hastings, MN

Re: Contitech airbags on sale

Reply #47
Roger,

If I were in your place and wanted to get the job done, I would put the Firestones opposite each other on same axle;  left and right.

But thats me.  On big trucks we have mix and matched bags with no trouble.

jk
Jack and Cathy
1992 U280 Unihome 36' Build #4034
Cummins 8.3 /  Allison MT647/ PacBrake
Apopka, FL / Barre Center, NY

Re: Contitech airbags on sale

Reply #48
Mixing Airbag Brands

I ordered eight ContiTech airbags from FindItParts while we were in Wyoming.  When I got home I discovered they had shipped only six.  They said that was all they had but they still charged me for eight.  They are going to refund the price for two. No more are available for the time being.
So I can get Firestone w01-358-9448 for more money, free shipping.
Can I get two of these and use one Firestone and one Conti on each side?  Front or rear better?  Or two Firestone on one side and two Contis on the other?
It is hard to see any down side.  Any best way to mix them or should I get four Firestones?
I have ordered several different parts from FindItParts and they have been reliable. 
They both have the same amount of cubic inches inside and the flex of the rubber should not make any difference so I would not hesitate to mix bags, left or right side.

I also mix different manufacturer of tires on the rear left and right and have never been able to tell the difference. This would make way more difference than airbags unless you feel Asian Firestones might not get along with European Continentals.

Pierce
Pierce and Gaylie Stewart
'93 U300/36 WTBI
Detroit 6V-92TA Jake
1140 watts on the roof
SBFD (ret)

Re: Contitech airbags on sale

Reply #49
My personal preference would be to put the same brand , one of each at the same position on each side. One Firestone on the left rear, rear with the other Firestone on the right rear, rear.
The selected media item is not currently available.
Gerry & Brenda
CHARLOTTE HARBOR, FL
1994 Grand Villa - # 4466
U300 Unihome - 6V92 Detroit
4 speed Allison - Jake Brake