Skip to main content
Topic: M11 gear reduction starter (Read 679 times) previous topic - next topic

M11 gear reduction starter

I'm seriously thinking of swapping out our OEM starter for a gear reduction unit. Looking on the Delco Remy website supposedly shows the starter for a M11 450HP at around $450.
My service center quoted starter with install at $1200+. Am I looking at the correct starter? Or am I missing something?
Bill & Jan Velting
1998 U320 36'    2014 Xtreme facelift
build #5339  MC#17207
current toad: 2014 Cadillac SRX

Re: M11 gear reduction starter

Reply #1
Using the Forum SEARCH tool, I found this recent entry:

Hard start!!

In the above thread, Roger (Roger & Susan in Home2) said:

A new gear reduction starter turns the engine over a bit slower but with more power (torque) from the starter will less battery load.  I replace mine last summer. Found a genuine, brand new Delco starter on Ebay shipped for about $300.  Genuine Heavy Truck Delco Remy 8200308 Starter 39MT 12V 11T CW  See...

Delco Remy 39mt Starter 8200308 CW 12v for sale online | eBay
1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"

Re: M11 gear reduction starter

Reply #2
Chuck's link is the same one I put on. Labor price is way out of line if this is the price for the starter.
1999 40 ft. U-320 wtfe build 5563 Chuck & Lynda's "Rollin' Inn"  2030 watts solar
prev. mh's 71 GMC 5 yrs. 73 Pace Setter 1 yr. 78 Vogue 5 yrs 81 FTX 40ft all electric 18 yrs. 1996 Monaco Signature 3 yrs.
2014 Grand Cherokee Overland
Dream as if you will live forever. Live as if you will die today.  James Dean

Re: M11 gear reduction starter

Reply #3
I cant' find the ticket for mine, but it seems like it was around $300 two years ago. I also spent another$100 +/- on tools I didn't have. If you can get the coach raised up and have a good work place, it isn't real bad to change.. It has a difficult bolt on top to get to and is HEAVY. The new one is a lot lighter. I've got a write up on what I went thru in the search.

Larry
Larry Warren
1996  U320 36' SBID "Lola" sold 2020
Build #4970
Motorcade #18318

Re: M11 gear reduction starter

Reply #4
This looks to be the cheapest one available at this time.

Genuine Delco Remy 8200308 NEW 39MT Gear Reduction Starter 12V 11 Tooth...
1999 40 ft. U-320 wtfe build 5563 Chuck & Lynda's "Rollin' Inn"  2030 watts solar
prev. mh's 71 GMC 5 yrs. 73 Pace Setter 1 yr. 78 Vogue 5 yrs 81 FTX 40ft all electric 18 yrs. 1996 Monaco Signature 3 yrs.
2014 Grand Cherokee Overland
Dream as if you will live forever. Live as if you will die today.  James Dean

Re: M11 gear reduction starter

Reply #5
I cant' find the ticket for mine, but it seems like it was around $300 two years ago. I also spent another$100 +/- on tools I didn't have. If you can get the coach raised up and have a good work place, it isn't real bad to change.. It has a difficult bolt on top to get to and is HEAVY. The new one is a lot lighter. I've got a write up on what I went thru in the search.

Changing starter on M11 engine
1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"

Re: M11 gear reduction starter

Reply #6
Thanks Chuck, I had a meeting to go to, didn't have time.

Larry
Larry Warren
1996  U320 36' SBID "Lola" sold 2020
Build #4970
Motorcade #18318

Re: M11 gear reduction starter

Reply #7
Thanks everyone for input. I'm unable to install myself so will show this to my service people and go from there. Thanks again
Bill & Jan Velting
1998 U320 36'    2014 Xtreme facelift
build #5339  MC#17207
current toad: 2014 Cadillac SRX

Re: M11 gear reduction starter

Reply #8
750.00 for install is 600.00 high. It's heavy but not 750 bucks heavy.
Dub McBride 1996 270

Re: M11 gear reduction starter

Reply #9
Just replaced mine with Red Tractor's help, he did all the work, I helped lower and raise into place.  Took about 1hr. -- 45m trying to get the bolts broke loose and 15m for the swap out.

I cleaned the ground wires all around and it spins like a top now, very pleased with it.

2000 GV320 4010 build #5712  2019-?
1999 Bounder 2000-2008
Bardstown, KY
🥃The Bourbon Capital of the World🥃