Skip to main content ↑ ↓
Topic: Living room slide bladder DIY (Read 11108 times) previous topic - next topic

Re: Living room slide bladder DIY

Reply #140 –
So couple of weeks ago I put in a inquiry about some HWH micro switches.  Figured I'd order one and a extra just in case. Well to my surprise they were $191 each. Forget that I'll figure out something similar that will work. Part number AR19988. Found some on eBay for $115 each. Showed two in picture but said only one item. So that was a bunch lower so I ordered one and it came in today. Actually both of them came today.
R AP19988 HWH Micro Switch Assembly Hydraulic Jacks RV Camper Motorhome | eBay
That's a great deal IMO. They have more if anyone needs a spare. This is the slide retracted position sensor 👍👍
Scott

Re: Living room slide bladder DIY

Reply #141 –
Looks like a few needed some..........Sold Out.  Thanks for the Part Number Scott, that will help.

Re: Living room slide bladder DIY

Reply #142 –
Took the Thomas pump out of my coach today and found out what the "filter" built into the base is.  In the first picture, you can see the input side has a hose going to a barb to 1/4npt fitting in the base.  There's a piece of foam stuck down there with a channel cut in it, width-wise where the fitting is.  Not sure if this was a FT piece or something from a previous owner.

Re: Living room slide bladder DIY

Reply #143 –
That's the way ours is.