Re: Fuel hose project - 1998 U320 36-foot Reply #40 – August 12, 2025, 10:16:16 pm Three extra feet to reach the tank fitting when the tank is still half-way out. I could not creach them with the tank in. No usable access from the tunnel to the tank.The sleeve does make the fuel line slicker, and maybe a little less likely to kink. Not very thick. Recommended to me,and I recommend it to you. Pushing it on the fuel line expands the weave so it slides on. Slide and pull, slide and pull... Good abrasion resistance when installed. You will likely see one or two old hoses nearly worn through.Our coach has press on? Slide on? Fittings. They are slightly tapered, and I dampened the hole in the hose with some fuel and shoved. If I remember right, the only fittings I bought were barrel connectors to temporarily attach new hose to old.Our generator hoses would not move. I ran plastic conduit to protect them.I THINK I left a full write up with new line lengths, procedures, etc around the Forum somewhere.Ask us anything! Quote Selected
Topic: Fuel hose project - 1998 U320 36-foot