Skip to main content ↑ ↓
Topic: tapping on 12 volt light sw (Read 415 times) previous topic - next topic

tapping on 12 volt light sw

I have taped into a 12volt sw that feeds my ceiling light. I using led strip light and when hooked up I get low voltage that bleeds by the sw and partially lights the ceiling light when leds are lit. Can anybody tell me how to fix it.?
1995 U320 40', 2013 chevy sonic toad, my real love are corvettes have owned 30

Re: tapping on 12 volt light sw

Reply #1 –
You may have connected the two lights in series and it needs to be in parallel.

Jim
Jim Frerichs
2002 U320 42'

Re: tapping on 12 volt light sw

Reply #2 –
If you attached your LED lights to both sides of the switch you will have the problem you are having. If there are only 2 wires at the switch and both go to the switch then you need to find out which one is hot all the time and connect to that one for your hot and then ground the other wire
2014 ih45  (4th Foretravel owned)
 1997 36' U295 Sold in 2020, owned for 19 years
  U240 36' Sold to insurance company after melting in garage fire
    33' Foretravel on Dodge Chassis  Sold very long time ago
 

Re: tapping on 12 volt light sw

Reply #3 –
You are correct I will find the hot leg and try and find a ground. Finding a ground in a cabinet may be a problem. 
1995 U320 40', 2013 chevy sonic toad, my real love are corvettes have owned 30