Skip to main content ↑ ↓
Topic: Fresh tank fill port location (Read 740 times) previous topic - next topic

Fresh tank fill port location

On my u280 I have been looking over the water piping before I start flushing the system. I can't seem to put an eyeball onto the actual location that the fresh water goes into the tank after you open the fill valve in the bathroom. I don't want to pull the water heater out just to look. Can anyone tell me where on the tank I really need to be looking?

Thanks
Toby a 94 u280
Cummins 8.3
6 speed Allison
Exhaust brake


Adopted by Derek and Annabelle

Re: Fresh tank fill port location

Reply #1 –
I  think you will find the water goes in the bottom of the tank through the piping
previous 1984 35 ft ORED 250 HP 3208 Cat       
previous 1998 40 ft U295 CAI 325 hp Cummins
previous 2003 40 Ft u320 build #6140 450 Cummins M11.                                                         
1999 Mazda Miata
Ron, Nancy, Tipper the cat, Max The dog
1997 U 270 36 ft build number 5174 8.3 Cummins

Re: Fresh tank fill port location

Reply #2 –
There isn't a separate input line.  It just TEES into the supply line that the water pump pulls from.
John Fitzgerald
1991 U300 (SAI) Side Aisle Island Bed 40'
Detroit 6V92 with Allison Retarder
Meridian (Boise), Idaho
 

Re: Fresh tank fill port location

Reply #3 –
And here I thought I lost a hose. Thanks guys.

After following it all the someday list has gained two more items. One map out this water system. And two redo this system with a mounted manifold.
Toby a 94 u280
Cummins 8.3
6 speed Allison
Exhaust brake


Adopted by Derek and Annabelle