Re: Starter Issues Reply #25 – May 07, 2019, 07:49:50 am John, the Youtube you posted was very informative. I also had never heard the terms "clocking the starter." That lesson will certainly save me lots of time in the future if I have to make a starter change. Thank you Quote Selected 1 Likes
Re: Starter Issues Reply #26 – May 15, 2019, 06:32:17 pm Well we waited for over a week for it stop raining and the ground to dry up some and today we were able to install the Delco Remy 39MT Gear Reduction Starter. The removal of the old starter was not bad since I had the coach raised up. With the help of my wife from above keeping tension on a rope and a stud, I was able to remove and slide the starter off of the stud and lower it down safely using two hands. That old starter was very heavy! The new starter was a breeze and I was able to lift it into position and bolt it in without any help. There was more room to install all the bolts. The starter didn't need to be clocked it was set right straight out of the box. The wiring connection were pretty straight forward. Started the coach using no boost and she spun and started fast. Very happy with the starter and installation. Would recommend this starter as a replacement. Thank you all for your support and recommendations. John M. Quote Selected 9 Likes
Re: Starter Issues Reply #27 – May 15, 2019, 08:04:28 pm Now, what to do with the old starter. I hate pitching it in the garbage when it could probably be rebuilt.John M Quote Selected
Re: Starter Issues Reply #28 – May 15, 2019, 08:20:04 pm John,It could definitely be rebuilt, if the stator and rotor is good the rest of the parts are not expensive. I would fix it for you for you if you were close by so you could have a back up. Mike Quote Selected 1 Likes
Re: Starter Issues Reply #29 – May 15, 2019, 10:38:20 pm John where did you find the best price on the starter? Quote Selected
Re: Starter Issues Reply #30 – May 15, 2019, 11:38:59 pm $235 with free shipping. New Genuine Delco Remy Starter 39MT 8200433 see details for fitment for sale...$296 39MT STARTER MOTOR GENUINE OEM NEW 11T CW 12VMake sure you have the exact P/N Quote Selected
Re: Starter Issues Reply #31 – May 16, 2019, 02:49:02 am I replaced my oem 42MT with a 39MT and have had much faster cranking ever since. Tossed the old one in the scrap bin and never looked back. Quote Selected 1 Likes
Re: Starter Issues Reply #32 – May 16, 2019, 05:12:21 am Roger I assume my m11 would use the same starter as John's m11... shouldn't it??? Quote Selected 1 Likes
Re: Starter Issues Reply #33 – May 16, 2019, 10:16:25 am Keith,I shopped around and found a lot of aftermarket and refurbished starters at a lower price on the Internet. I didn't order from an online store because I'm at a campground and they don't allow shipments into the park. We have over 1700 sites here and the park is secured. It would be a mad house if deliveries were allowed. The starter that was in my coach was a Delco Remy P/N 195830 made for Cummins. The new Delco Remy 39MT P/N 8200308 went into the coach M11 very easy and works great. I bought my starter at a local truck parts store "Action Truck Parts" here in Illinois and paid $319. John M Quote Selected
Re: Starter Issues Reply #34 – May 16, 2019, 02:32:34 pm Thanks John, for the p/n. I know Dave M put a geared starter in his 2001 ISM11 and liked it..Keith, I hate making assumptions when it is several hundred bucks. But I would think so.Here is one on ebay for $280.Genuine Heavy Truck Delco Remy 8200308 Starter 39MT 12V 11T CW New for...I called and he confirmed it would work on my 2001 ISM11 Quote Selected 1 Likes
Re: Starter Issues Reply #35 – May 16, 2019, 03:46:18 pm Quote from: Roger & Susan in Home2 – May 16, 2019, 02:32:34 pmThanks John, for the p/n. I know Dave M put a geared starter in his 2001 ISM11 and liked it..Keith, I hate making assumptions when it is several hundred bucks. But I would think so.Here is one on ebay for $280.Genuine Heavy Truck Delco Remy 8200308 Starter 39MT 12V 11T CW New for...I called and he confirmed it would work on my 2001 ISM11Roger,On your link that part is out of stock and it was a great price. When looking for the starter you need to look for a Genuine Delco Remy 39MT. There a lot of aftermarket and refurbished ones out there. The Genuine starters range from $275 to almost $400 out there. Then you hope it's free shipping.John M.John M. Quote Selected
Re: Starter Issues Reply #36 – May 16, 2019, 03:48:44 pm Being proactive I ordered the starter today. Quote Selected 2 Likes
Re: Starter Issues Reply #37 – May 16, 2019, 05:24:55 pm Quote from: John Morales – May 16, 2019, 03:46:18 pmRoger,On your link that part is out of stock and it was a great price. John, I went there and it says there are two available, but the shipping is local pickup only. Quote Selected 1 Likes
Re: Starter Issues Reply #38 – May 16, 2019, 07:33:15 pm Sounds like a good idea. I ordered one for $280 at the Ebay link. I called the vendor to verify that it is a genuine Delco and that it was new and that it would fit on a 2001 ISM11. OK on all accounts. Ask him to ship and he will. $10 to MN. Shipped within 2 hours using FedEx.His phone number is (763) 226-3205. He said he has more.Photos of what he shipped. Quote Selected 2 Likes
Re: Starter Issues Reply #39 – May 16, 2019, 09:15:11 pm Glad it went well. It should last another 20 years. Quote Selected 1 Likes
Re: Starter Issues Reply #41 – May 18, 2019, 06:41:14 pm Roger,You are going to like it.John M. Quote Selected
Re: Starter Issues Reply #42 – May 18, 2019, 07:53:52 pm I ordered one yesterday also! Should be here next week... hopefully it won't be a booger to install Quote Selected
Re: Starter Issues Reply #43 – May 18, 2019, 08:18:29 pm Quote from: hdff – May 18, 2019, 07:53:52 pmI ordered one yesterday also! Should be here next week... hopefully it won't be a booger to installKeith,It was a simple installation. The hardest part was taking out the old one. The old starter is over 100 pounds. I had my wife help me with the weight using a guide rope from above. The new one went in easy with room to spare and I was able to get it up and bolted without any help. It was a breeze. Just make sure you raise the coach high enough to pull the breaker bar.John M. Quote Selected 2 Likes
Re: Starter Issues Reply #44 – May 18, 2019, 10:55:37 pm Hecho a mexico, so must be good.JohnH Quote Selected
Re: Starter Issues Reply #45 – May 18, 2019, 11:28:34 pm Really??? How does that quality control work? Quote Selected
Topic: Starter Issues