Skip to main content ↑ ↓
Topic: Remove radiator  (Read 1365 times) previous topic - next topic

Re: Remove radiator

Reply #25 –
Rick,
 
Some of  your pictures show a good luck at the fiberglass after you remove the side panel. What is on the back of the fiberglass that the screws are being held by?
 
Thanks,

Trent
Trent and Jean Eyler
2000  U295  4003  WTFE  ISC  350
Build#5603 MC#17385

Re: Remove radiator

Reply #26 –
Just a piece of aluminum moulding  on the opposite side you hold it in place and screw in too  it I'll take a picture tomorrow
Rick & Hilda looking forward to full- timing one day for now couple of months at a time
1999 U270 3602
Built number  5530.  Feb 1999            Motorcade  number 18438
8.3 Cummins Allison six speed with brake  retarder
Purchased Nov 28 2019
 

Re: Remove radiator

Reply #27 –
Quote from: TulsaTrent –
Rick,
 
Some of  your pictures show a good luck at the fiberglass after you remove the side panel. What is on the back of the fiberglass that the screws are being held by?
 
Thanks,

Trent
. here are some pictures      on the left side of the radiator panel it is screwed true  the panel into a aluminum strip behind the Corner panel  And on the top and right hand side you screw in to a square tubing part of the frame in the last picture is the top  moulding and the two pieces of the left-hand side    the outside moulding  and the aluminum piece that goes on back side of the panels to screw in too  the piece of aluminum that they use is the same as the the aluminum trim they use on the side of the motorhome
Rick & Hilda looking forward to full- timing one day for now couple of months at a time
1999 U270 3602
Built number  5530.  Feb 1999            Motorcade  number 18438
8.3 Cummins Allison six speed with brake  retarder
Purchased Nov 28 2019