Re: Fill valve stuck open after cleaning
Reply #2 –
Just armchair guessing here, so TIFWIW.
Perhaps the power wires were hooked up incorrectly?
One of you could listen to the solenoid, and feel it with your fingers, while the other turns the fill valve switch on and off. Should be able to hear and feel the solenoid clicking open and closed.
If solenoid is not moving, then it could be a wiring/switch/power supply problem. Check with multimeter (or test light) to verify power is getting to the solenoid when switch is activated.
If the problem is not electrical, then it is mechanical. That means take the valve apart again and see what's wrong.