Skip to main content ↑ ↓
Topic: Spring Lift on Outside Access Doors (Read 697 times) previous topic - next topic

Spring Lift on Outside Access Doors

Any tricks to getting the spring lift rods compressed enough to reinstall on exterior access doors?
Mike
Mike Brady
'97 U320 SE. #5137
'13 Honda Fit
Willow Springs, MO

Re: Spring Lift on Outside Access Doors

Reply #1 –
Open the door enough that the spring end can just snap on.
Brett Wolfe
EX: 1993 U240
Moderator, ForeForum 2001-
Moderator Diesel RV Club 2002-
Moderator, FMCA Forum 2009-2020
Chairman FMCA Technical Advisory Committee 2011-2020

Re: Spring Lift on Outside Access Doors

Reply #2 –
Pipe clamp or Irwin quick grip clamp

How do I install gas springs?
Learn every day, but especially from the experiences of others. It's cheaper!  - John C. Bogle

2000 U320 36' non-slide / WildEBeest Rescue
2003 U320

Re: Spring Lift on Outside Access Doors

Reply #3 –
Well, the laugh's on me;  I just happen to have 4 of those clamps!  Never gave 'em a thought till you mentioned them...
Mike Brady
'97 U320 SE. #5137
'13 Honda Fit
Willow Springs, MO
 

Re: Spring Lift on Outside Access Doors

Reply #4 –
another way to do it was shown to me by Rance (ex Extreme) he used one of the strap clamps that are good for holding down things onto a trailer or roof. Just put the air spring inside it and ratchet away till it compresses to the right size. Worked perfect on the ones i did on the basement door I repaired there.Almost no chance of it jumping out either while compressing.
John
Coachless, now use aircraft. 2003 Ford Travelair TC280 class C. Super shape. Just for 1 yr .
1994 Ford E350 ClassC,total renovation inside and out. Now sold.
2000 U295  36' Cummins 350 c/w Banks Stinger, Resonator upgrade,Solar, LED lites.Residential fridge with slide out pantry. Build 5674. Sold
ex 92 GV 022C ored Cummins. Sold
ex 95 GV240 cat 3116. Sold
2017 Mini cooper s & 2016 land Rover LR2 HSE  LUX.
jhaygarth@aol.com    SKP #130098
treat everyone as you would like to be.