Skip to main content ↑ ↓
Topic: Hydraulic pump pulley (Read 677 times) previous topic - next topic

Hydraulic pump pulley

Anyone have experience of getting the pulley off the fan hydraulic pump shaft on a 1994 U280 Cummins 8.3? One of the 2 holes used for inserting a bolt to push it off has a bolt already broken off in it. Anybody ever do it successfully?
1994 U280, Build 4490
Deming, NM.

Re: Hydraulic pump pulley

Reply #1 –
It can be taken off, but the broken bolt will have to be removed so another bolt can be installed and then with penetrating oil and patience should come off
previous 1984 35 ft ORED 250 HP 3208 Cat       
previous 1998 40 ft U295 CAI 325 hp Cummins
previous 2003 40 Ft u320 build #6140 450 Cummins M11.                                                         
1999 Mazda Miata
Ron, Nancy, Tipper the cat, Max The dog
1997 U 270 36 ft build number 5174 8.3 Cummins

Re: Hydraulic pump pulley

Reply #2 –
Just the 2 bolts or do I need a wheel puller as well?
1994 U280, Build 4490
Deming, NM.

Re: Hydraulic pump pulley

Reply #3 –
Just the two bolts as that pushes the pulley off of the wedge shaped part that is on the shaft, that is held in place due to the wedge effect. You should not need a wheel puller.
previous 1984 35 ft ORED 250 HP 3208 Cat       
previous 1998 40 ft U295 CAI 325 hp Cummins
previous 2003 40 Ft u320 build #6140 450 Cummins M11.                                                         
1999 Mazda Miata
Ron, Nancy, Tipper the cat, Max The dog
1997 U 270 36 ft build number 5174 8.3 Cummins

Re: Hydraulic pump pulley

Reply #4 –
look on you tube under flanged taper lock coupling and taper lock coupling. Gam
joseph gambaro
1999 U295 36'
 

Re: Hydraulic pump pulley

Reply #5 –
GOT IT! Thanks red and Gam. Secret ingredient....patience.
1994 U280, Build 4490
Deming, NM.