Skip to main content ↑ ↓
Topic: Slide Bladder Not Deflating Again (Read 539 times) previous topic - next topic

Slide Bladder Not Deflating Again

My previous post (and Forum members' good follow-up on this topic) was eight months ago. Moderators: if you would prefer to join the threads, that's fine.

The reason for posting again is because in Santa Fe this morning, we had the same problem. We are due in Phoenix on Saturday to begin a new job (both of us still work). Is there someone in Tucson or Phoenix who is Foretravel savvy that Forum members would recommend? We just can't get back to Nacogdoches this time.  :-(

With thanks!


The selected media item is not currently available.Richard & Susan Peck
____________________
1999 40' U320 "Bob Patrick"
(2000 4010 U320 WTFE Floor Plan, Single Slide)
Build #5567  |  MC #17522

Re: Slide Bladder Not Deflating Again

Reply #1 –
We have a "Arizona Coach" that has been serviced by both these firms in the past, the PO said nothing about them, so, you'll have to do the legwork, I'd be interested. By the way, we're just down the road in Ajo, come vist!

RV Dealers in Phoenix AZ | Orangewood RV Center

Southwest RV | RV Repair & Service, RV Storage, RV Parts
1993 U-240 "La Villa Grande"..CAT 3116 w/ Pacbrake PRXB...Allison 3060 6-speed..
Previous: 1983 Airstream 310 turbo diesel, 1979 Airstream 280 turbo diesel
                                      Build # 4297
                                      PNW natives
                      Home base:  'Cactus Hug' (Ajo, Arizona)
                        DW Judy & Chet the wonder dog
                        Full-Timers 'Sailing the asphalt sea'

Re: Slide Bladder Not Deflating Again

Reply #2 –
Mike,

Thanks for the suggestions! If we use either facility, we'll sure give you (and other Forum members) an update! Thanks for the invitation to get acquainted, too. Once we have our feet on the ground and all the coach worries resolved, we'll check-in with you.

Now we're off for another 300 miles with the audible alert for the level system serving as accompaniment to our drive!
The selected media item is not currently available.Richard & Susan Peck
____________________
1999 40' U320 "Bob Patrick"
(2000 4010 U320 WTFE Floor Plan, Single Slide)
Build #5567  |  MC #17522

Re: Slide Bladder Not Deflating Again

Reply #3 –
Would sure consider cutting the wire to the alarm and reconnecting with butt connector when fixed.  The alarm would drive me crazy in a 300 mile drive.

Be sure to keep an extra-careful eye on gauges if you do disconnect it.  But same goes for driving with the alarm on-- it would not change what happens were you to even loose oil pressure.
Brett Wolfe
EX: 1993 U240
Moderator, ForeForum 2001-
Moderator Diesel RV Club 2002-
Moderator, FMCA Forum 2009-2020
Chairman FMCA Technical Advisory Committee 2011-2020

Re: Slide Bladder Not Deflating Again

Reply #4 –
Quote from: LookingWest –
Is there someone in Tucson or Phoenix who is Foretravel savvy that Forum members would recommend? We just can't get back to Nacogdoches this time.  :-(
With thanks!
I have no personal experience with these guys, but others on the blog have recommended them, and I saved the information.

Premier Motor Coach Services
3631 E. Farnum Pl.
Tucson, AZ 85706
Toll-free: 877-624-2024
Local: 520-624-2024
Good Luck, Dave A
Dave and Nancy Abel
'00 U320 36' WTFE  Build #5669
'10 Jeep Wrangler Unlimited Rubicon
Livingston, TX  SKP's Fulltiming

Re: Slide Bladder Not Deflating Again

Reply #5 –
Thanks, Brett, re: cut and reconnect. I'm not familiar with a "butt connector." Is that just a quick disconnect of some sort? You're right: 5 hours with the alarm dinging yesterday were about my limit. Had a large adult beverage upon arrival.

Despite me not understand the term, I think your post answered a question I was about to ask:  that is, are there separate wires for each sensor to trigger the audible alarm (i.e., oil, air, etc.)? Since it appears we will continue to have this slide problem, if there is a separate wire from the leveling system to trigger the alarm, could a switch be installed to mute only that? Sounds like the answer is "no"?

I do watch the gauges VERY carefully, regardless. The VDOs in our 1999 are mostly dead, so we run Silverleaf's VMSpc on a laptop that sits on the dash.  Coolant, transmission, and oil temperatures and oil pressure are all in my frequent scan—along with the two air gauges on the dash.

Thanks again!
The selected media item is not currently available.Richard & Susan Peck
____________________
1999 40' U320 "Bob Patrick"
(2000 4010 U320 WTFE Floor Plan, Single Slide)
Build #5567  |  MC #17522

Re: Slide Bladder Not Deflating Again

Reply #6 –
Dave & Nancy,

Thanks for the pointer to Premium Motor Coach in Tucson. We're in Las Cruces, NM, right now and heading to Tucson next. I will check in with them, schedule permitting.
The selected media item is not currently available.Richard & Susan Peck
____________________
1999 40' U320 "Bob Patrick"
(2000 4010 U320 WTFE Floor Plan, Single Slide)
Build #5567  |  MC #17522

Re: Slide Bladder Not Deflating Again

Reply #7 –
Just FYI for all who are reading this thread: I have a friend, Thomas Schmidt, who says that Cummins Rocky Mountain in Phoenix is one of the best shops he has seen: clean, efficient, helpful. This friend owns a business with locations in CA and FL that do boat rebuilds and custom marine craft, so he understands what high-end customer service should be and he is a lot more mechanically astute than I am. He also owns a Newmar Dutch Star and is traveling full-time with his family, so he is RV-aware.

Cummins probably can't help with what ails us at the moment, but since we also appear to have small core leak in our radiator, I have a feeling we'll be seeing Cummins Phoenix sometime between now and April.

That said, hope this post helps someone else with diesel or generator needs.
The selected media item is not currently available.Richard & Susan Peck
____________________
1999 40' U320 "Bob Patrick"
(2000 4010 U320 WTFE Floor Plan, Single Slide)
Build #5567  |  MC #17522

Re: Slide Bladder Not Deflating Again

Reply #8 –
Google electrical butt connector, essential a crimp on way of splicing two wires.
In this case, I would use a "spade" type crimp on connector, which has a male and female end, which would make it easier to disconnect again in future if situation arose.
If using "spade" connector, I always use the ones encased in insulating material, I have run across "bare metal" versions
Tim Fiedler    2025 LTV Unity MBL on Order
2000 Chevy Tracker 2 Door Convertible 4WD Now lifted 4.5"
1985 Citroen 2CV6 Charleston
Murphy Rebel on wheels with 175HP Titan
Cessna P337
1980 48' Westport MY (!/4 Share)

Re: Slide Bladder Not Deflating Again

Reply #9 –
How could I forget the obvious:  just Google it!  Thanks, Tim, and thanks for the additional info/suggestions.

In a different thread,  good info about installing a switch, too:  Dash Warning Alarms

Thanks, everyone!
The selected media item is not currently available.Richard & Susan Peck
____________________
1999 40' U320 "Bob Patrick"
(2000 4010 U320 WTFE Floor Plan, Single Slide)
Build #5567  |  MC #17522

Re: Slide Bladder Not Deflating Again

Reply #10 –
Quote from: LookingWest –
Thanks for the pointer to Premium Motor Coach in Tucson. We're in Las Cruces, NM, right now and heading to Tucson next. I will check in with them, schedule permitting.
One very nice thing about Tucson; it's a heck of a lot easier to steer a big coach around than Phoenix!  ^.^d
1993 U-240 "La Villa Grande"..CAT 3116 w/ Pacbrake PRXB...Allison 3060 6-speed..
Previous: 1983 Airstream 310 turbo diesel, 1979 Airstream 280 turbo diesel
                                      Build # 4297
                                      PNW natives
                      Home base:  'Cactus Hug' (Ajo, Arizona)
                        DW Judy & Chet the wonder dog
                        Full-Timers 'Sailing the asphalt sea'

Re: Slide Bladder Not Deflating Again

Reply #11 –
As far as the dash gauges my guru buddy pulled the wires off the gauges and squeezed the ends tighter and then reinstalled the wires
"Riding and rejoicing"
Bob
1997 U320 40' Mid entry, build 5132,  wtbi ce27, 4th owner
2007 Solara convertible
2 prodeco tech outlaw ss electric bikes

1095 watts solar
08 Ls 460 and a sc430
2000 Ford F-250 superduty 4x4

Re: Slide Bladder Not Deflating Again

Reply #12 –
Just saw this thread ... that is an old address for Premier. They have done a good bit of maintenance work on our rig.  The new address is 4340 E Tennessee St, Tucson.  Phone number is the same.  They can plug you in and keep you overnight, if need be.  Tell Eric that we sent you!
Carol & Jeff Savournin
Usta have a '93 U225 36', Usta have a '95 U320 40', Usta have a '02 U320 40'
Usta have a 2006 Born Free, Usta have a 2011 Phoenix Cruiser
Usta have a 2012 Jeep Wrangler Unlimited 4dr
"Your time is limited, so don't waste it living someone else's life."  Steve Jobs
 

Re: Slide Bladder Not Deflating Again

Reply #13 –

For making wiring connections, I prefer long neck crimp-on caps.  pretty fool proof, single crimp.  Lots of sizes available.  100 for $less than $4.

Amazon.com: Install Bay CCL1614 Crimp Cap Nylon Connector 16/14 Gauge Long...

Good crimping tool for these, works for all sizes

GB GS-388 8-Inch Crimping Electrical Plier - Crimpers - Amazon.com

As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.
Roger Engdahl and Susan Green
2001 U320 3610 #5879 (Home2) - 2014 Jeep Cherokee or 2018 F150
Hastings, MN