Skip to main content ↑ ↓
Topic: How to pour water disinfectant into the fresh water tank (Read 717 times) previous topic - next topic

How to pour water disinfectant into the fresh water tank

Ok. Getting ready to purify the water system. I bought Camco Spring Fresh Tastepur to put in the fresh water holding tank. All my previous campers had a direct access hole to pour into the tank.  I need to add an entire gallon of the Camco product.
Ideas would be appreciated
Thanks
1996 U295-36, Cummins 300hp, 8.3. Build number 4864. Vin number 1F97D536XTNO54271. Purchased October 31, 2019.

Re: How to pour water disinfectant into the fresh water tank

Reply #1 –
Pour the recommended amount through your hose.  I usually unreel the hose then pour it down the hose.  When you fill your tank it will push it in.
John M.
John & Carm Morales

"We travel not to go anywhere, but to just go.  We travel for travel's sake.  Our great desire is to move."

Re: How to pour water disinfectant into the fresh water tank

Reply #2 –
If you have an external sediment & Carbon filter. You can remove the filters and pour the solution into the empty filter holders. If you don't have any external filters. You should get some.

RV water filter store
Jerry & Nona and Kimeru the cat that thinks she's a dog
1998 36' WTFE U320  #5314 Motorcade #17711
USAF 1975-1995
2019 Subaru Crosstrek 'toad'
2003 Subaru Legacy touring car
jerry Fincher | Flickr

Re: How to pour water disinfectant into the fresh water tank

Reply #3 –
Quote from: bigdog –
If you have an external sediment & Carbon filter. You can remove the filters and pour the solution into the empty filter holders. If you don't have any external filters. You should get some.

RV water filter store

Great idea. I like it. Thanks for posting this.

Dan, plain bleach works too.
1993 U300 40ft GV SE
Build # 4344

Re: How to pour water disinfectant into the fresh water tank

Reply #4 –
I built in an external water fill two years ago with a T going to a larger fitting with a screw on cap. I wanted to fill the tank faster than I could with the regular fill valve. I can fill the tank in about 15 minutes now. With the extra fitting, I can add bleach to disinfect the system when I take it out of storage in the spring or if I feel it could just use a little extra cleaning. One of the best and simple mods I have done. I still thank those that went before me for showing the way.

Larry
Larry Warren
1996  U320 36' SBID "Lola" sold 2020
Build #4970
Motorcade #18318

Re: How to pour water disinfectant into the fresh water tank

Reply #5 –

I use a garden hose water filter to add bleach.  Stick it on your hose, fill clear jar with bleach (holds about a cup), turn on water.  EASY

Example below - you can usually find them locally at the big box home improvement stores.

Amazon.com : PowerFit PF31089 Garden Hose Inlet Filter : Garden & Outdoor

As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.
1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"

Re: How to pour water disinfectant into the fresh water tank

Reply #6 –
Quote from: ohsonew –
I built in an external water fill two years ago...
X2 What Larry said.

For adding large quantities of anything to the water tank (OP's original question) a quick fill connection IS very handy.

Search the Forum for several variations on this idea.  My version (below) is simple and cheap - kinda like me.  8)

What did you do to your coach today VII  (Reply #29)
1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"

Re: How to pour water disinfectant into the fresh water tank

Reply #7 –
I have had good luck using tap water only. No filter in line.  Slight chlorine seems to work great.
"Riding and rejoicing"
Bob
1997 U320 40' Mid entry, build 5132,  wtbi ce27, 4th owner
2007 Solara convertible
2 prodeco tech outlaw ss electric bikes

1095 watts solar
08 Ls 460 and a sc430
2000 Ford F-250 superduty 4x4

Re: How to pour water disinfectant into the fresh water tank

Reply #8 –
I assume there is no pressure valve at the water hose hookup. I can just pour it in without pressure?
1996 U295-36, Cummins 300hp, 8.3. Build number 4864. Vin number 1F97D536XTNO54271. Purchased October 31, 2019.

Re: How to pour water disinfectant into the fresh water tank

Reply #9 –
Quote from: John Morales –
Pour the recommended amount through your hose.  I usually unreel the hose then pour it down the hose.  When you fill your tank it will push it in.
John M.

That's how we always do it! 
Carol & Jeff Savournin
Usta have a '93 U225 36', Usta have a '95 U320 40', Usta have a '02 U320 40'
Usta have a 2006 Born Free, Usta have a 2011 Phoenix Cruiser
Usta have a 2012 Jeep Wrangler Unlimited 4dr
"Your time is limited, so don't waste it living someone else's life."  Steve Jobs
 

Re: How to pour water disinfectant into the fresh water tank

Reply #10 –
I use a tagline inline filter use in dripline systems
Amiad Tagline Filters — DripWorks.com
I use the. 3/4" Amiad Tagline 200 Mesh for $19.95. Part number FAMCP34200
You need hose adaptors at each end.  The filter catches most particulates (rust, sand etc).  The bowl screws off and you can put some disinfectant in the bowl, screw it back on and disinfect the hose and water at the same time.
Roger Engdahl and Susan Green
2001 U320 3610 #5879 (Home2) - 2014 Jeep Cherokee or 2018 F150
Hastings, MN